Wondering if anyone had any ideas on how to correct the angles/ if there off. I feel they are off. But I figured you guy would know more.

 

And it goes little bumpsteer all the way up to 45 after that its horrible and causes death
Wobble.

 

looks like you have stock steering, so as long as you are using a track bar that uses the stock mounting locations, you should not have any bumpsteer.

 

ditto. describe this "bumpsteer" you have. did you ever align it after you lifted it?

 

Bump steer as in when I get into "grooves" in the road it will pull me left or right and same Symptoms over pot holes. That's up to 45-50 ish, and I don't dare go more then 50 cause the past three times be tryed it's been DW baddd. Never been aligned going to get that done tomorrow. Put different tires on it today and that's when I start having these problems. Or at least they got noticeable.

 

Sounds like it's toed in too far making it darty. This more than likely compounds any death wobble. The steering angles look fine from here, I've seen ugly ones and they drove how they looked. Shake the front end down and fix what's loose and isn't supposed to be. I would at least get the alignment checked and see how bad things are or aren't.

 

first off, that is definitely not bump steer.

secondly, get your jeep aligned! it is crazy important that you get it aligned after lifting it. that is most likely why you are getting death wobble as well.

 

Sounds good. And yes it's toed in. Did a few rough measurements. I guess it just looked weird to me cause of the bends in my track bar.

 

The bends are there to help clear things. As long as it's tight it should be fine.

 

Well it's getting aligned. Hopefully all is well afterwards.