ive searched the the threads and did my homework but still cant decide what would be best for me. my xj sits at 4-5" now, unsure because its a bastard lift, but still on stock short arms.

i cant get my caster set properly even with the lower arms extended all the way so im building a long arm, since ill be sitting around 6-7" with the new parts coming in.

i think im gonna go with 3 link, but what i cant decide is should i go with 3 full length arms all attached to the crossmember or have a radius arm setup.

i have 1.75" x 5/16" wall dom for the lowers, and 5/16" wall 1.5" for the upper.

keep in mind that this is my dd, so streetability is a priority. this thing flexes plenty already so im not looking to increase it, per se. plus im running 36s so i dont need to have it flex so much that im slicing my tires in the wells.

any advice on this will be helpful.

 

Another question- do i need adjustable lowers? Can i make fixed lowers and have an adjustabke upper to control the caster?

 

Depending on what you can and want to build i run a radius arm setup on my rig RC long arms to be exact but i might some how make it into a 3 link i would personally do a 3 link

 

I would run a 3 link, alot more flex, just make sure you build them stout and use good bolts

 

3 link FTW