boat siding
#1
CF Veteran
Thread Starter
Join Date: Jun 2011
Location: Nor-Cal
Posts: 2,858
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: The venerable 4.0
boat siding
Can anyone show me pictures of a boatsided vehicle and explain a little on how the rockets come off.... is is as strong as sliders.... any way it can tweak the unibody with.a.hard hit.... basically asking for.a.compare between slides and boatsiding.
Last edited by Slick761; 07-10-2011 at 01:01 AM.
#2
Junior Member
Join Date: Aug 2009
Location: Austin, Tx
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Basically it is a slider except its just mounted higher, how high depends on you. It will be tied into the frame so it should be plenty strong. The rockers are cut off. You can weld a 2x6 in place of the original rockers and you will have a slider if you plan on running doors and dont want to do too much work. Boatsiding is more involved and you would have to modify the doors if you planned on keeping them.
Do some searching and im sure you'll find some more info. Heres one I read on pirate.
http://www.pirate4x4.com/forum/showthread.php?t=953563
Do some searching and im sure you'll find some more info. Heres one I read on pirate.
http://www.pirate4x4.com/forum/showthread.php?t=953563
Last edited by Onetype; 07-10-2011 at 02:15 AM.
#3
CF Veteran
Thread Starter
Join Date: Jun 2011
Location: Nor-Cal
Posts: 2,858
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: The venerable 4.0
Thanks.... got it now. Most of the people on here seem to be doing more like sliders. Seems like the True boatside is more for trail rigs.
#4
Junior Member
Join Date: Aug 2009
Location: Austin, Tx
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Ya the 2x6 rocker is a good idea and its rather simple to do. As long as you brace it to the frame it should beef the area up quite a bit and give you a little ground clearance. Heres a link to it.
https://www.cherokeeforum.com/f58/rockers-75178/index2/
https://www.cherokeeforum.com/f58/rockers-75178/index2/
Last edited by Onetype; 07-10-2011 at 02:35 AM.
Trending Topics
#9
CF Veteran
Join Date: Jun 2010
Location: Hayward, CA
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Some have seen the door frame beat up and out of shape due to repeated abuse without bracing to the frame. Most are probably ok though. If you brace to the frame, definitely do frame stiffeners first. I would never ever brace to the frame before stiffeners are put on.
Thread
Thread Starter
Forum
Replies
Last Post
jurazov
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
07-20-2023 04:13 AM
almostamos
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-14-2015 02:53 PM
Bruce Hauptman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-05-2015 09:31 PM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
09-05-2015 07:56 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)