BEDLINER????
#1
Newbie
Thread Starter
Join Date: Aug 2011
Location: Jasper,GA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 HO
BEDLINER????
Hey guys my carpet is shot!!!! Has anyone ever tried the roll in bed liner??? The spray in stuff is exspensive. Just wondering if the do it yourself stuff works??
#2
Senior Member
Join Date: Dec 2010
Location: Pittsburgh, PA
Posts: 848
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
It works. From what I have seen the roll on is not as smooth but with the right prep work and a couple of well applied coats and you'll be fine.
#4
Seasoned Member
Join Date: Oct 2009
Location: Tucson AZ
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
Year: 94
Model: Cherokee
Engine: 4.0
If you want it right, prep prep prep and then prep some more. Just remember to protect any thing you don't want lined. Seatbelt bolt holes, seat studs, etc. Do it when you have lots of time to let it air out.
#5
CF Veteran
I did mine in the morning and then drove to dinner that night. the girlfriend and I were sick from the fumes. It was dry to the touch/rub but still giving off fumes.
#6
Newbie
Thread Starter
Join Date: Aug 2011
Location: Jasper,GA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 HO
Guys I need help just started removing the carpet so I can install bed liner and when I did I found the mortal enemy RUST!!. Passenger side floor board area one hole about the size of a golf ball. How do I fix it?? This is my first cherokee can I buy a floor pan and have it welded in or bondo??
i dont know what my options are. PLEASE HELP????
i dont know what my options are. PLEASE HELP????
Trending Topics
#9
Member
Join Date: Jul 2011
Location: Connecticut
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 Inline 6
Just weld a small plate to the size you need. 14 guage worked for me. This was my floor. Started by cutting it out till i got into meaty metal. Then sand off to prep the weld. Depending on where your hole is i paint the gullet thing under. Once u start cutting it open youll understand. Then weld a plate over it. Paint that. I used por 15 but u can use just about anything. Good luck. Look at my pics if u need more info. Or pm me
#10
Newbie
Thread Starter
Join Date: Aug 2011
Location: Jasper,GA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 HO
Ok Cool!!! Dang had me worried thought I had bought a dud!!!!! I really dont have access to a welder would pop rivets work or should I just drop the coin for somone to weld it for me?
#12
CF Veteran
Join Date: Aug 2010
Location: Greensboro
Posts: 1,220
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L
Welding is your best option but plenty have riveted before. I also used the rustoleum spray on bedliner and it came out great. I did 2 coats and used 3 cans. I liked it so much I decided to use that for my rockers, wheel wells, and around the edge of my fenders. No complaints so far. I had used the duplicolor before and within 2 weeks it was chipping off
#13
CF Veteran
Join Date: Dec 2010
Location: shawnee,ks
Posts: 9,897
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
Originally Posted by adamk
Welding is your best option but plenty have riveted before. I also used the rustoleum spray on bedliner and it came out great. I did 2 coats and used 3 cans. I liked it so much I decided to use that for my rockers, wheel wells, and around the edge of my fenders. No complaints so far. I had used the duplicolor before and within 2 weeks it was chipping off
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)