Baseball Card When I Sound Right
Thread Starter
Newbie
Joined: Mar 2017
Posts: 11
Likes: 0
From: Arizona
Year: 1999
Model: Cherokee
Engine: 4.0L
I recently started having a problem where when I turn right it will continue to make a sound like a baseball card in a wheel spoke that comes from underneath my center console area. I can not find what is happening at all. Is it a bad steering component? Recently changed out my bad 242J TC with a new one that has the Hack n' Tap installed. BUT it only makes the noise when I turn RIGHT, and will go away when I turn the jeep to the left such as when I switch lanes to the left. Anyone else have this problem?
Seasoned Member
Joined: Feb 2017
Posts: 352
Likes: 6
From: Pampa, Texas
Year: 1986
Model: Cherokee
Engine: 2.5 liter
Couple of things to check, when you changed the transfer case, 1) is the fluid level correct and the correct fluid, and 2) is the shift linkage adjusted correctly? Sounds a little like the case is not completely engaged into gear. I can't explain the right turn only noise other than maybe just a different loading on the drive train.
Just a thought. Maybe worthless but when your scrambling...thoughts help. Good Luck and keep us updated.
Happy Jeepin'
TexasTaz38
Just a thought. Maybe worthless but when your scrambling...thoughts help. Good Luck and keep us updated.
Happy Jeepin'
TexasTaz38
Thread Starter
Newbie
Joined: Mar 2017
Posts: 11
Likes: 0
From: Arizona
Year: 1999
Model: Cherokee
Engine: 4.0L
No locker in the front sadly. Ordered some new U-Joints for upfront and will probably crack open my front diff this weekend. Probably open up my T-Case next to see if the chain is stretched or to see if there is any chunky soup in there.
Thread
Thread Starter
Forum
Replies
Last Post
baren
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
36
Jan 11, 2016 03:20 PM
Morris4x4Center
Vendor Showcase
0
Dec 22, 2015 12:48 PM
baren
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Oct 10, 2015 12:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




