fair enough, let me ask you this though- my pedal doesnt feel like it hits resistance untill its almost to the floor, do i just need to adjust the pedal assembly possibly? like once its to the floor, the clutch kinda engages and i can shift if moving...master and slave arent leaking,, so thats like the only thing left it could be right?

 

Either needs adjusting or to be bled better. These things suck to bleed.

 

I always use a power bleeder. I force fluid into the bleeder screw and suck the extra out of the master.

 

No bleeder screws on newer external slaves ....here what I did. http://www.ebay.com/itm/CENTRIC-139-67007-Clutch-Slave-Cylinder-Assy-/321040212696?ru=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_sacat%3D0%26_nkw%3D321040212696%26_rdc%3D1&nma=true&si=xZcnpomP5IR%252B1FNKwAresDUePDM%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557

 

So I tried to give the pedal some more throw thinking it wasn't engaging enough- well. Changed nothing. Still not able to shift into gear while running. I've bled it over and over to no avail...thoughts?

For what its worth, when I push in the clutch I can hear the clutch or maybe the gears (idk) whining and grinding...

 

Wish you luck in getting this going. I would love to swap my AW$ for an AX15 one day. How man hours do you suggest you have in the swap?

 

Between me, my buddy jeepsurfer, and his driveway, about 4 days total. Then again I had problems out the ads and worked most evenings