Theres plenty others had same issue...http://www.google.com/#bav=on.2,or.r...&ved=0CCgQBSgA

 

Nope. Its an all stock renix.

 

This

 

Ax 15 shaft dia is 0.75 wont fit. that's a ba10 bearing....http://www.rockauto.com/catalog/moreinfo.php?pk=220543

 

1994 ax 15 bearing...http://www.rockauto.com/catalog/more...900&cc=1180213

 

Well it fits my ax15

 

Theres two size front shafts for ax15 early and late...

 

Bushing, pilot, AMC 258 & 4.0L I6 & V8 1972-1991 to T14 1972-1975, T15, T18 1972-1975, AX15 1992-1999, NV3550 & NSG370 transmissions

 

The bearing that came with my clutch kit was to small for my crank but fit tranny perfect ...hmm

 

Mine must be early then.

 

First ax 15 was mid 89 had the .549 something od shaft rare to find one.

 

I got one then. Lol

 

num 22 http://www.quadratec.com/jeep-replac...sions/ax15.php

 

Hey guys,
the ax15 is installed, vehicle runs like a champ, but driving....eh....

the clutch is acting like it doesnt want to engage when you put the pedal down, it half way engages, but you still have to rev-match it to make it fall in gear, making things like reverse and first damn near impossible...

ive bled the system, took off the plastic piece on the front of the slave, thinking maybe it was causing it to not engage enough, still have the problem...
OD, can you post a pic of your pedal assembly? im curious that the master isnt getting fully engage, like my clutch pedal sits maybe 5-6in off the firewall?

 

I will on monday. Jeep is at a buddys house.