has anyone put in a JK jeep lower arms on a XJ with out any mods? i wanted to try using the new JK lower control arms because its steel the shape of arching in so my tires don't rub and i thought i have seen someone put JK arms in a XJ but wanted to make sure it'd fit without any modifications. please let me know anything about it and pictures to show would be great!

 

I know WJ (99-04 Grand Chero) LCA's fit.
Found this for you..
https://www.cherokeeforum.com/f2/jk-...s-no-no-60183/

 

Thanks that's what i was looking for. i'm going to try something like that so my tires have clearace from LCA's.

 

Front lca off a jk are to long for on xj. I run rear lca and front uca off a jk on my xj. I did cut and sleeve them with dom to push my axle forward about 1.5". Works great at 3.5" of lift.

 

not sure why you would want a stock JX LCA they bend just like the stock XJ ones.

 

so you had to change the length of the control arms but the bushings/ends were bolt-in? Do you know if the coil springs will work to gain any lift? I could buy a complete factory jk suspention with all the control arms springs and shocks for 125 bucks. I will need some components when i lift my mj this winter