Sep 21, 2015, 02:17 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Wheels and Tires
- Jeep Grand Cherokee ZJ 1993 to 1998 Tires General Information and Specs
Important information to help you understand your Jeep Grand Cherokee.
Browse all: Wheels and Tires
All Lift & Tire questions go here!!!
CF Veteran
Joined: Sep 2011
Posts: 1,062
Likes: 0
From: Reidsville NC
Year: 1994
Model: Cherokee
Engine: 4.0
Originally Posted by Basslicks
from what I hear, they are not that hard to adapt.... search the forum - I know there are a few on here that have done that.
Newbie
Joined: Jan 2012
Posts: 4
Likes: 0
From: Rapid City, SD
Year: 1992
Model: Cherokee
Engine: 4.0L
Don't mean to jump in on anybody's convo, but i have a problem. I just got a 1992 Cherokee with about 8 inches of lift, the rear springs are sagging. It has terra flex shackles and is now spring over axle. The front has 6" lift spring and 2 inch spacers. I need to know what size rear spring pack to buy. Anyone have any ideas?????
Senior Member
Joined: Aug 2010
Posts: 692
Likes: 1
From: Tempe, AZ
Year: 1990
Model: Cherokee
Engine: l6 242
Originally Posted by Frizzle450
Don't mean to jump in on anybody's convo, but i have a problem. I just got a 1992 Cherokee with about 8 inches of lift, the rear springs are sagging. It has terra flex shackles and is now spring over axle. The front has 6" lift spring and 2 inch spacers. I need to know what size rear spring pack to buy. Anyone have any ideas?????
CF Veteran
Joined: Jan 2010
Posts: 1,062
Likes: 0
From: Fort lewis, wa/ university place, wa
Year: 1999
Model: Cherokee
Engine: 4.0L
Originally Posted by LeRoy90laredo
The Cherokees are all sprung over the axle, Comanches are under. If you can get an even 8" set of leaves I'd do that, or replace with a set of 6.5+shackles. The weight will break in the back to about 8".
CF Veteran
Joined: Jan 2010
Posts: 1,062
Likes: 0
From: Fort lewis, wa/ university place, wa
Year: 1999
Model: Cherokee
Engine: 4.0L
Originally Posted by waffalz22
Dang /: guess I'm stayin with my 30/35 combo
Banned
Joined: Feb 2012
Posts: 948
Likes: 0
From: Ohio
Year: 1999
Model: Cherokee
Engine: 4.0l i6
Ok I dont know too much about axles but what do I want in front/back when I swap the axles? D44 for both front and rear? Please dont give me crap about this question haha I just need to know what I should look for. I want a direct bolt, or pretty close. I have a 99 sport 2WD (being converted into 4WD) so I need a new front axle regardless haha
Member
Joined: Feb 2012
Posts: 143
Likes: 0
From: jackson tn
Year: 1996
Model: Cherokee
Engine: 4.0
Does anyone out their know what problems having the front axle off center will cause me. I have a adjustable track bar but I just added coil spacers and I don't think I have enough adjustment to compensate. Looks to be about 2 to 3 in off. I have a 5.5" long arm kit and I put 2 1/2 in spacers in to level it out. Thanx for any info.
Seasoned Member
Joined: Nov 2011
Posts: 448
Likes: 0
From: Falls Church, VA
Year: 2000
Model: Cherokee
Engine: 4.0 I6
If I get a RC 3inch Leaf pack lift. Then decided to get shackles and pucks to add more lift later later...do I have to get extensions for anything?
Banned
Joined: Feb 2012
Posts: 948
Likes: 0
From: Ohio
Year: 1999
Model: Cherokee
Engine: 4.0l i6
Originally Posted by firewalker
Does anyone out their know what problems having the front axle off center will cause me. I have a adjustable track bar but I just added coil spacers and I don't think I have enough adjustment to compensate. Looks to be about 2 to 3 in off. I have a 5.5" long arm kit and I put 2 1/2 in spacers in to level it out. Thanx for any info.
CF Veteran
Joined: Mar 2010
Posts: 6,685
Likes: 6
From: Jacksonville, FL
Year: 92
Model: Cherokee
Engine: 4.0
Originally Posted by Scott0821
Ok I dont know too much about axles but what do I want in front/back when I swap the axles? D44 for both front and rear? Please dont give me crap about this question haha I just need to know what I should look for. I want a direct bolt, or pretty close. I have a 99 sport 2WD (being converted into 4WD) so I need a new front axle regardless haha
Banned
Joined: Feb 2012
Posts: 948
Likes: 0
From: Ohio
Year: 1999
Model: Cherokee
Engine: 4.0l i6
Originally Posted by N20jeep
The only direct bolt ins for the d44 are an xj d44 rear and a TJ rubicon 44 for the front
CF Veteran
Joined: Mar 2010
Posts: 6,685
Likes: 6
From: Jacksonville, FL
Year: 92
Model: Cherokee
Engine: 4.0
Originally Posted by Scott0821
OK thanks for responding... Will I have to change the gearing in them to run 33's?
