So i swapped a 2wd tranny with a 4wd. This is the 2nd time installin the thing. First time i didnt get the T/C all the way on and broke the pump. I heard it grinding, not good. Pulled it back out and figured out what i messed up. Replaced the pump, reinstalled the tranny and hooked everything up like it should be. But now i get no power out of the engine. Didnt hear anything out of place just no movement. Anybody have an idea?

 

Fluid level?

 

New torque converter?
Did the torque converter click 3 times on install?

 

New T/C new pump new aft fluid. Im missing something obviously simple

 

Ok, pulled tranny again afraid i broke the pump again. Pump not broke, ok. Fluid level? Drained, half quart low. Reinstalled, new ATF. Let it run for a good solid 15 min, put in in reverse and nothing. When i put it in park you can feel it grind out of gear.

 

Is the transfer case in neutral?

 

Hey dont get the transfer case gears backwards if your not gonna hook up the links yet. Stupid mistake that I over looked. It GOES again.

 

Good to hear.