4x4 Conversion in a 2001...
Thread Starter
CF Veteran
Joined: Aug 2010
Posts: 8,387
Likes: 1
From: The Florida State University
Year: 2001
Model: Cherokee
Engine: I-6 4.0 L
Hey y'all... finally getting around to a 4x4 conversion. I know I need Tranny, transfer case, and front axle.
But, I need some specifics. Thus the reason I'm posting this. I'm running a 2001 sport. All the 4x4 conversion threads I have found were for Comanches or pre-97.
Just don't know what is compatible and what is not.
Specs: Chrysler 8.25, 3.55 gears with the AW4
What I would like: 4x4 (obviously!
). In all seriousness, the only thing I want done in the swap is the AX-15.
That being said... any point me in the right direction as to what I can use and from what years? Thanks!
But, I need some specifics. Thus the reason I'm posting this. I'm running a 2001 sport. All the 4x4 conversion threads I have found were for Comanches or pre-97.
Just don't know what is compatible and what is not.
Specs: Chrysler 8.25, 3.55 gears with the AW4
What I would like: 4x4 (obviously!
). In all seriousness, the only thing I want done in the swap is the AX-15.That being said... any point me in the right direction as to what I can use and from what years? Thanks!
CF Veteran
Joined: Jul 2009
Posts: 2,245
Likes: 1
From: New Jersey (Milltown, Lavallette, and Wayne)
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Check out this build: https://www.cherokeeforum.com/f46/my-2wd-xj-68132/
He did the conversion on a 97+
He did the conversion on a 97+
Thread Starter
CF Veteran
Joined: Aug 2010
Posts: 8,387
Likes: 1
From: The Florida State University
Year: 2001
Model: Cherokee
Engine: I-6 4.0 L
Check out this build: https://www.cherokeeforum.com/f46/my-2wd-xj-68132/
He did the conversion on a 97+
He did the conversion on a 97+
Any other words of wisdom for a 17 year old kid?
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Hey y'all... finally getting around to a 4x4 conversion. I know I need Tranny, transfer case, and front axle.
But, I need some specifics. Thus the reason I'm posting this. I'm running a 2001 sport. All the 4x4 conversion threads I have found were for Comanches or pre-97.
Just don't know what is compatible and what is not.
Specs: Chrysler 8.25, 3.55 gears with the AW4
What I would like: 4x4 (obviously!
). In all seriousness, the only thing I want done in the swap is the AX-15.
That being said... any point me in the right direction as to what I can use and from what years? Thanks!
But, I need some specifics. Thus the reason I'm posting this. I'm running a 2001 sport. All the 4x4 conversion threads I have found were for Comanches or pre-97.
Just don't know what is compatible and what is not.
Specs: Chrysler 8.25, 3.55 gears with the AW4
What I would like: 4x4 (obviously!
). In all seriousness, the only thing I want done in the swap is the AX-15.That being said... any point me in the right direction as to what I can use and from what years? Thanks!
front and rear drive shaft , pedal assembly,transfercase shifter and linkage,console 4x4 shifter bezel,ax15 shifter boots threres three,clutch master and slave, pilot bearing,fly wheel,pressure plater clutch disc,thro out bearing with fork,linkage bracket that attached to the floor board under neath for transfer linkage,all bolts that held all the above stuff on donor vechicle.i think thasts all
Last edited by freegdr; Feb 22, 2012 at 05:41 PM.
Thread Starter
CF Veteran
Joined: Aug 2010
Posts: 8,387
Likes: 1
From: The Florida State University
Year: 2001
Model: Cherokee
Engine: I-6 4.0 L
97 and up ,tranny ,transfer case ,dana 30 hp front axle from a automatic xj so gear ratio matches you rear you have now,
front and rear drive shaft , pedal assembly,transfercase shifter and linkage,console 4x4 shifter bezel,ax15 shifter boots threres three,clutch master and slave, pilot bearing,fly wheel,pressure plater clutch disc,thro out bearing with fork,linkage bracket that attached to the floor board under neath for transfer linkage,all bolts that held all the above stuff on donor vechicle.i think thasts all
front and rear drive shaft , pedal assembly,transfercase shifter and linkage,console 4x4 shifter bezel,ax15 shifter boots threres three,clutch master and slave, pilot bearing,fly wheel,pressure plater clutch disc,thro out bearing with fork,linkage bracket that attached to the floor board under neath for transfer linkage,all bolts that held all the above stuff on donor vechicle.i think thasts all
Thread
Thread Starter
Forum
Replies
Last Post
jeepdewd
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
20
Aug 2, 2016 01:29 AM
FS[GreatLakes]: Aw4 Transmission 67xxx miles
JeepStephie99
Engines/Tranny/T-Case
14
Nov 19, 2015 11:49 AM
LittleRed94
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Oct 6, 2015 08:09 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



