4-hi over voltage
04-19-2015, 11:52 PM
#1
Newbie
Thread Starter
Join Date: Oct 2011
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
4-hi over voltage
I have a 98 XJ (np231) I bought bone stock and blown up. I'm finishing a ground up build on it and finally got it running. However I notived that my part time 4wd light flickers and stays on in 2wd. When I shift into 4hi- my voltage skyrockets and I get a CEL for over voltage. I figure I have a short somewhere but was curious where I should start looking. Visually inspecting the wires with the transmission out, I see no external damage. 2wd voltage is fine as well. any help would be appreciate.
Thread
Thread Starter
Forum
Replies
Last Post
sluger17
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
07-08-2023 07:08 AM
SergeK
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
02-27-2023 03:38 PM
chrispl57
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
09-30-2015 08:13 AM
Zerocyde
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-27-2015 02:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)