the track bar is pulling it that way

 

i did the exact same lift on mine a couple weeks ago, i drilled a new hole for my track bar 3/4" to the right, seems to work just fine

 

Bump steer like a muvvvvv tho when its done this way

 

it is making the axle move over, when i fix it will the trac bar line up again?

 

no it wont thats what the bracket is for some guys get the axle centerd as best they can and then drill a new hole over to the right of the old one,its not some thing i would do i would get the bar to go back in its factory hole untill i get the relocation bracket or adj bar ,they way you center the axle back under the cab is, with lift kit all installed tires on and xj on ground off any jacks or stands is turn the ignition key on with motor not running and torn the steering wheel cab will move over axle untill you can slide bolt in factory hole

 

thats what i did and had no issue, works for now

mine seemed to handle just fine...

 

X2

 

Sweet thanks guys i had a little help from a friend and we took the trac bar off and moved the axle right over and now the front is done, tomorrow starting the rear , seeing that im a high schooler and dont have much time i feel good that i got that done today, Thanks

 

No prob!! Make sure you pb blast the hell out of the leaf spring bolts and good luck

 

haha yeah man i picked up a can of that today that stuff is the best. Thanks i will keep in contact if any more questions

 

Post some pix when ur done!

 

I will do i have alot of pics already but i have to resize em and prob by this weekend ill have some up i hope.

 

did you do the alingment yet

 

if not heres the basicshttp://www.4x4xplor.com/alignment.html