Modified XJ Cherokee Tech XJ (84-01)
All modified tech questions. If it modifies your XJ beyond stock parts ask it here.
Sponsored by:
Sponsored by:

4.5 lift coil help

Thread Tools
 
Search this Thread
 
Old Aug 27, 2011 | 03:32 PM
  #1  
REEDracing94's Avatar
Thread Starter
Member
 
Joined: Mar 2011
Posts: 234
Likes: 0
From: Linwood MI
Year: 1999
Model: Cherokee
Engine: 4.0
Default 4.5 lift coil help

Intalling a 4.5 in rough country lift. Is there a secret to getting these coils in? I have everything unhooked that the instructions say, but I need a nother 2 inchs to get the coils in.
Reply
Old Aug 27, 2011 | 03:38 PM
  #2  
THENNING's Avatar
Senior Member
 
Joined: Apr 2010
Posts: 895
Likes: 0
From: PA
Year: 1999
Model: Cherokee
Engine: 4.0 6 cylinder
Default

are you using a coil spring compressor?
Reply
Old Aug 27, 2011 | 03:42 PM
  #3  
REEDracing94's Avatar
Thread Starter
Member
 
Joined: Mar 2011
Posts: 234
Likes: 0
From: Linwood MI
Year: 1999
Model: Cherokee
Engine: 4.0
Default

i tried but i couldnt seem to get them to compress far enough, but there also harbor freight junk, and im afraid the compressors will snap. i will try that again.
Reply
Old Aug 27, 2011 | 03:47 PM
  #4  
dogger15's Avatar
CF Veteran
 
Joined: Apr 2010
Posts: 4,339
Likes: 1
Model: Cherokee
Default

Take the bottom bolt of the track bar off
Reply
Old Aug 27, 2011 | 04:01 PM
  #5  
REEDracing94's Avatar
Thread Starter
Member
 
Joined: Mar 2011
Posts: 234
Likes: 0
From: Linwood MI
Year: 1999
Model: Cherokee
Engine: 4.0
Default

i did. also pulled the drag link? i think thats the proper name for it haha
Reply
Old Aug 27, 2011 | 04:40 PM
  #6  
dogger15's Avatar
CF Veteran
 
Joined: Apr 2010
Posts: 4,339
Likes: 1
Model: Cherokee
Default

Are the control arms off too
Reply
Old Aug 27, 2011 | 05:35 PM
  #7  
Evil Drew M's Avatar
Senior Member
 
Joined: Jul 2011
Posts: 598
Likes: 1
From: Wilmington, NC
Year: 1997
Model: Cherokee
Engine: 4.0L
Default

Originally Posted by dogger15
Are the control arms off too
That's the key
Reply
Old Aug 27, 2011 | 05:55 PM
  #8  
REEDracing94's Avatar
Thread Starter
Member
 
Joined: Mar 2011
Posts: 234
Likes: 0
From: Linwood MI
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Had the lowers off. Ended up tightening the crap outta the spring compressors and squeezed the coils in. Thanks for the help
Reply
Old Aug 27, 2011 | 08:17 PM
  #9  
ericfx1984's Avatar
CF Veteran
 
Joined: Jan 2011
Posts: 2,251
Likes: 1
From: Missouri
Year: 1996
Model: Cherokee
Engine: 4.0HO
Default

well not sure what your front suspension is but I just drooped the axle, with the sway bar disconnected and popped her in there
Reply
Old Aug 28, 2011 | 05:29 PM
  #10  
rwood93's Avatar
Junior Member
 
Joined: Oct 2010
Posts: 55
Likes: 0
Year: 1996
Model: Cherokee
Engine: 4.0 I6
Default

Take the brakes off and the lower control arms and all that...and they will go right I just did this on Saturday for my lift...it works
Reply
Old Aug 28, 2011 | 05:30 PM
  #11  
rwood93's Avatar
Junior Member
 
Joined: Oct 2010
Posts: 55
Likes: 0
Year: 1996
Model: Cherokee
Engine: 4.0 I6
Default

Stay clear of spring compressers I almost lost my hand when I used them
Reply
Old Aug 28, 2011 | 09:15 PM
  #12  
REEDracing94's Avatar
Thread Starter
Member
 
Joined: Mar 2011
Posts: 234
Likes: 0
From: Linwood MI
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Got the whole front end done but I need more help. For the back what did everyone do to extend the parking brake cable? Also I cracked the steel part of my brake line while trying to put the extension bracket on. What is the best line to use on a 4.5 in lift in the rear?
Reply
Old Aug 28, 2011 | 10:53 PM
  #13  
REEDracing94's Avatar
Thread Starter
Member
 
Joined: Mar 2011
Posts: 234
Likes: 0
From: Linwood MI
Year: 1999
Model: Cherokee
Engine: 4.0
Default

I'm seeing yj brake line are good for 4" lift, is this for the rear? If so what part of the brake line do I replace? I cracked the steel part of the line right by the bracket coming off the uniframe rail.
Reply
Old Aug 29, 2011 | 05:30 PM
  #14  
rwood93's Avatar
Junior Member
 
Joined: Oct 2010
Posts: 55
Likes: 0
Year: 1996
Model: Cherokee
Engine: 4.0 I6
Default

i never extended my emergency brake line and have yet to have a problem...as for the brake line bracket just bend the hard line (dont snap it) till you have enough slack in the flex line part then just fab a new mount your self might take 20 min and some hardware store nuts and bolts..all it really has to do isw be able to hold the brake line in place it dosent have to be pretty
Reply
Old Aug 29, 2011 | 05:32 PM
  #15  
rwood93's Avatar
Junior Member
 
Joined: Oct 2010
Posts: 55
Likes: 0
Year: 1996
Model: Cherokee
Engine: 4.0 I6
Default

sh#$ my bad i think i might have read that wrong...if you snapped the brake line itself then just go steal braided or with the yj one
Reply



All times are GMT -5. The time now is 12:08 PM.