Hayden98XJ

Anyone heard of this or tried it? Plan on rebuilding and I like the idea of a little power gain. Just wanna know if anyone on here has tried it. Results? Thoughts? Is it as simple as having the machining done and dropping in the crank, pistons, bearings, and injectors?

Hayden98XJ

Anyone?

wader218

Here's some info I found on 4.5 L


4.5L "Poor man's" simple stroker

Jeep 4.2L 3.895" stroke crank
Jeep 4.2L 5.875" rods
Sealed Power 677CP standard bore pistons
9.2:1 CR
Stock 4.0 camshaft
Ported HO 1.91"/1.50" cylinder head
Mopar/Victor 0.043" head gasket
0.088" quench height
Ford 24lb/hr injectors with stock 39psi FPR for '87-'95 engines, stock injectors with stock 49psi FPR for '96 and later engines
247hp @ 4900rpm, 300lbft @ 3500rpm

4.5L Low-buck simple stroker

Jeep 4.2L 3.895" stroke crank
Jeep 4.2L 5.875" rods
Jeep 4.0L 3.875" standard bore pistons
9.7:1 CR
CompCams #68-231-4 206/214 degree camshaft
Ported HO 1.91"/1.50" cylinder head
Stock 0.051" head gasket
0.081" quench height
Ford 24lb/hr injectors with adjustable FPR or MAP adjuster for '87-'95 engines, Ford 24lb/hr injectors with stock 49psi FPR for '96 and later engines
266hp @ 4950rpm, 322lbft @ 3500rpm

Not a 4.2 but may be helpful.

Hayden98XJ

Yeah, stupid of me to not post the info. Thanks though.
4.2L Milder mini-stroker

AMC 232 3.500" stroke crank
Jeep 4.0L 6.125" rods
Silvolite UEM-2229 +0.060" bore pistons
Increase piston dish volume to 23cc
8.8:1 CR
CompCams 68-115-4 192/200 degree camshaft
Ported HO 1.91"/1.50" cylinder head
Mopar/Victor 0.043" head gasket
0.040" quench height
Ford 24lb/hr injectors for '87-'95 engines, Accel 24lb/hr injectors for '96-'04 engines, '98 Chevy LS1 25.2lb/hr injectors for '05-'06 engines*
241hp @ 5000rpm, 294lbft @ 3000rpm