hi i have a question,,, can i just 35-12.5-15 on the stock steel rims???? need to know before i buy them/

 

also stock gears, everything is stock aside the 6.5 lift

 

Tires will rub leafs in the rear, I know this for fact, front I believe you would rub control arms. As far as gears, I'm running 35s with my stock 3.55gears, been that way for 2years, but I'm getting ready to swap my new axles in with 4.88s

 

wat about puting on wheel spacers??

 

as already stated they will definately rub. my 33" x 10.5"s rubbed on stock rims in the front and were too close to the leafs in the rear for my liking. You need more backspacing. Also most of the 12.5 wide tires require an 8" wide rim at minimum. I believe the stock rims are only 7"

 

You could buy a set of new steel rims for the price of good spacers.

 

Will get rims then thanks guys

 

yes

 

wat size rim and back spacing would i need??

 

I run 15x8 with 3.75 backspace

 

Tires dont rub my leaves and i have 12.5's on stock rims btw.

 

Which wheels?

 

The stock 5 spoke steelies

 

He may not rub on the leaves but he's sure as hell rubbing on his LCAs when turning. Get wheels, I got mine from Summit without shipping for under $250.

 

I mounted a set of 35x12.5 tires on my stock steal 5spoke wheels,they would have rubbed the leaves to the point where you would not have been able to move the Jeep. So unless your running different axles or spacers, I'm not sure how you managed to make it work. Any pics?