3 Inch Lift Prep..Need some help
Thread Starter
Old School CF Moderator
Joined: May 2010
Posts: 9,652
Likes: 3
From: Chattanooga
Year: 2001
Model: Cherokee
Engine: 4.0
Read that bfg mt km2s are almost a half inch smaller than they state on the tire. If i go with 31s will they be a decent difference from my punny 235/75s??
CF Veteran
Joined: Dec 2010
Posts: 1,246
Likes: 1
From: Missouri
Year: 1998
Model: Cherokee
Engine: I6 4.0 L
Originally Posted by Xj88
Read that bfg mt km2s are almost a half inch smaller than they state on the tire. If i go with 31s will they be a decent difference from my punny 235/75s??
Seasoned Member
Joined: Nov 2010
Posts: 479
Likes: 0
From: NE Ohio
Year: 1996
Model: Cherokee
Engine: 4.0
Originally Posted by OOdynamite
What?!?!? Pics or I don't believe you lol
Thread Starter
Old School CF Moderator
Joined: May 2010
Posts: 9,652
Likes: 3
From: Chattanooga
Year: 2001
Model: Cherokee
Engine: 4.0
Got under there with my ratchet, a 2 inch extension and a 13mm socket. 3 of them came out quite easy..one took a little force but after the initial muscle it backed out easily..no heat, just a tad of pb
CF Veteran
Joined: Oct 2010
Posts: 2,412
Likes: 2
From: York PA/State College PA
Year: 2001
Model: Cherokee
Engine: 4.0L I6
Originally Posted by Xj88
Got under there with my ratchet, a 2 inch extension and a 13mm socket. 3 of them came out quite easy..one took a little force but after the initial muscle it backed out easily..no heat, just a tad of pb
Thread Starter
Old School CF Moderator
Joined: May 2010
Posts: 9,652
Likes: 3
From: Chattanooga
Year: 2001
Model: Cherokee
Engine: 4.0
Dude me either...I got Under this morning expecting the worst...first one
Came out easy..second one came out easy and the bottom mounts were nothing...one shock out..right side shock started off hard..the exhaust pipe was in the way so I just used a deep socket, no extension. With a little muscle it cracked loose and came right out.
Came out easy..second one came out easy and the bottom mounts were nothing...one shock out..right side shock started off hard..the exhaust pipe was in the way so I just used a deep socket, no extension. With a little muscle it cracked loose and came right out.
CF Veteran
Joined: Oct 2010
Posts: 2,412
Likes: 2
From: York PA/State College PA
Year: 2001
Model: Cherokee
Engine: 4.0L I6
Originally Posted by Xj88
Dude me either...I got Under this morning expecting the worst...first one
Came out easy..second one came out easy and the bottom mounts were nothing...one shock out..right side shock started off hard..the exhaust pipe was in the way so I just used a deep socket, no extension. With a little muscle it cracked loose and came right out.
Came out easy..second one came out easy and the bottom mounts were nothing...one shock out..right side shock started off hard..the exhaust pipe was in the way so I just used a deep socket, no extension. With a little muscle it cracked loose and came right out.