1990 renix Cherokee Rebirth
#1
Newbie
Thread Starter
Join Date: Oct 2016
Location: NC
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
1990 renix Cherokee Rebirth
I have a 1990 Cherokee (renix). Several years ago, I took out motor, and rebuilt it. Had to bore out 60 over, all new bearing cam etc.. Standard rebuild. Well, it sat on the engine stand for 3 years, until recently, and is now back in jeep running like a top. So now that I have motor back in a running, the next phase is suspension. I'm looking to go 2-3 inches. I do not want to modify driveshaft, or steering gear. The rear spring are shot so bastard packs are out of the question, and I do not want to use spacers in front springs, there are shot as well. I'm looking for rear spring that provide a 2-.25 inch lift, and front springs. I remember reading somewhere that tj springs would give me the lift in the front and bolt in with new shocks.
Any idea appreciated. Dana 35c :-( in back and 30 in front.
Any idea appreciated. Dana 35c :-( in back and 30 in front.
#2
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,875
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Welcome.
Here's a good Sticky for you to look at.
https://www.cherokeeforum.com/f67/al...go-here-10579/
Here's a good Sticky for you to look at.
https://www.cherokeeforum.com/f67/al...go-here-10579/