Zone lift kit
Posted and it brought me back to this thread.
04-07-2013, 08:59 PM
#4
CF Veteran
Join Date: Feb 2013
Location: Colorado
Posts: 1,185
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0L
I have a 4.5 inch Zone lift and am very impressed with it. Much rather have it than an RC. I personally don't like RC lifts but that's just my opinion.
04-07-2013, 09:06 PM
#5
Senior Member
Join Date: Nov 2012
Location: Tx
Posts: 999
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: I-6
I looked around and had some folks telling me to get a RC 4.5 kit as it has alot of stuff with it. I decided to start small and get my feet wet with the zone kit ,I got mine for 290 shipped with the nitro upgrade shocks. I read and read somemore alot of not so faverable reads on the RC stuff.
Just my 2 cents.
Just my 2 cents.
04-07-2013, 09:14 PM
#7
Newbie
Thread Starter
Join Date: Apr 2013
Location: Texas
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Thanks guy it looks good to me and the price is right if I got it I would get the one with lower control arms and was not sure if I needed to get a new trac bar or not
Trending Topics
04-07-2013, 09:22 PM
#8
Member
Join Date: Nov 2011
Location: Canonsburg, PA
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
I was going to buy one but didnt have the money after i got my new place, but if you opt that route talk to AOR (Allens Offroad)here he has great deals on zone kits and will hook ya up, hes a good guy
04-07-2013, 09:25 PM
#9
Junior Member
Join Date: Jun 2012
Location: Arkansas
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0l
With the 3" dont think you need to get a track bar. With the 4.5 inch you will. either that or drill a new hole on the track bar mount.
04-07-2013, 09:46 PM
#10
Senior Member
Join Date: Nov 2012
Location: Tx
Posts: 999
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: I-6
04-08-2013, 02:20 AM
#11
CF Veteran
Join Date: Feb 2011
Location: Long Beach, Ca
Posts: 3,500
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
04-08-2013, 04:43 AM
#13
Senior Member
Join Date: Nov 2012
Location: Tx
Posts: 999
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: I-6
Yeah ok , I've been a set the toe and let it go guy unless it has other issues . Unfortunately the steering was horrible on the freeway and my jeep had bad bump steer at 35 mph . Looking back thru some old posts and talking to a few guys that have/had lifted jeeps. The general answer was I need longer control arms to fix the bump steer . I'm guessing the caster was way off making it drive like I was trying to herd a gaggle of cats . I replaced my track bar with a new stocker and I am pretty sure it is longer by 1/4-1/2 inch . So I will put it back in the stock position .
Last edited by Aljay; 04-08-2013 at 05:53 AM.
04-08-2013, 01:14 PM
#15
CF Veteran
Join Date: Feb 2011
Location: Long Beach, Ca
Posts: 3,500
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6