wouldnt this make it hard to turn? what about weldin?

 

Do you have a brand you would recommend? What online store can I find it at?

 

It will just click some under normal driving conditions.

In 4wd you will lose a little turning radius under throttle

I don't recommend welding the front for a dd

 

ok,i thought weldin wouldnt work but it be cheaper

 

Man this is getting deep! You know my next question. How do I know what gear ratio mine has and what a used one has if I found one?

 

Use Google and type in Dana 30 locker, most all lunchbox lockers are pretty much the same

 

Cheaper yes, but will cause tire noise and ruff ride on the street

 

Okay. I will check it out. Thanks for the info. I gotta go lay down. My **** is tired!

I will catch up with ya'll later.

 

well im not worried about a ruff ride at all,but will it break b4 a locker?

 

i have a STOCK dana 35 with a detroit locker and im running 35 inch tires, (stock shafts actually) and re geared to 456s.

i killed the dana 30 first.

im selling my dana 35 only because im going to 37 military tires otherwise if i kept my 35s id keep the dana 35.

the cool thing is you can get spare parts just in case from you dana 35 haters for next to nothing

 

how on earth does it cause it to ride rougher???

 

so should i weld my dana30 front? since i have a lsd rear dana35

 

Try turning on the street with a welded front. Tire will screetch and bind.

That's what I mean by riding rough, not suspension wise.

 

Ahh. I missed the welded front part also. Welded rear is fine but unless you have UN locking hubs I personally wouldn't weld it. An Aussie locker isn't too expensive even if you have to save up