Rattle can

 

I love my tj canyon rims

 

I just bought a set off a 2009. Do you have a close up and also what procedure did you follow? I've done the aluminum ones before but I figured the alloy ones would be alittle different.

 

I bought mine painted already. Ill tell you one thing. I did buy a new moab rim and a 33" bfg as a spare and painted it. Its super hard to not get it to run for some reason. I say use a lite grit sand paper, and then do REALLY lite coats until its even.

 

Go to my build thread, there is a pic of the one I painted.

 

Really light coats of primer and paint? I'am assuming etching primer? Thats what I used on the aluminum rims

 

I just used krylon dual.

 

Thought these came off a grand? I have same ones

 

they come off of a buncha things. I think you could get them on the xj as well. I could be wrong

 

Mine they came on it and will probably come off when I get another d window I only have 3 right now

 

Add another for the Canyons... these came off an 05 TJ (think that's the right model).

 

Has anyone running the canyons had to use longer studs I put them on today and it looked great then one of them decided it wanted to check out the ditch. Now I've ordered studs for a 03 rubi as they are longer. While I was taking studs out u also discovered my brakes and calipers were shot :banghead: so I'm replacing them also now. Lol oh the joys of buying a new xj finding all the little quirks about it

 

I didn't need new studs in the front, there was plenty of thread engagement there. But I did have to add new studs to the back when I did the disc conversion.

 

I did a little searching and found that if they came with aloy rims had a little longer studs if I read and assume correctly :beer: but mine had steel rims so maybe that's why I had to but Mr parts store man should have my new studs come 4 this evening

 

Why did the wheel fall off?