Cherokee Chat General non-tech Cherokee chat
XJ/MJ/ZJ/WJ

What have you left off??

Thread Tools
 
Search this Thread
 
Old Jun 13, 2010 | 09:05 AM
  #16  
JeepingDan's Avatar
CF Veteran
Premium Member
15 Year Member
Liked
 
Joined: Apr 2009
Posts: 18,786
Likes: 14
From: CT.
Year: 88
Model: Comanche (MJ)
Engine: 4.0 HO
Default

  1. interior plastic
  2. spare tire inside
  3. carpet
  4. Drain plugs in front
  5. A/c stuff. except compressor for oba
  6. rear wiper
  7. rear sway bar
  8. old springs and control arms
Reply
Old Jun 27, 2010 | 10:40 AM
  #17  
nielsenml's Avatar
Senior Member
 
Joined: Jun 2010
Posts: 881
Likes: 0
From: oregon
Year: 91
Model: Cherokee
Engine: 4.0
Default

I am going to rip the plastic thing off the bottom of my front bumper too. Also is there going to be any problems with removing the plastic in the wheel wells i.e. future rust problems.
__________________
Exactly what I would like to know as well, My wheel wheel plastic things are so brittle,(i accidentally put my finger through while washing,.. haha) i might as well go ahead and pull them out. As long as there is no fear of road debris kicking up into the engine. Probably the worst thing i can think of. Not sure though. I would like to hear of anyone that has run without them or should i look into replacing?
Reply
Old Jun 27, 2010 | 10:46 AM
  #18  
radio flyer's Avatar
Senior Member
15 Year Member
 
Joined: Feb 2009
Posts: 717
Likes: 0
From: Highlands Ranch Co.
Year: 1985 shell
Model: Cherokee
Engine: 1996 6 cylinder Briggs & Stratton
Default

Originally Posted by tuxfan212
I am going to rip the plastic thing off the bottom of my front bumper too. Also is there going to be any problems with removing the plastic in the wheel wells i.e. future rust problems.

Been running without them for over 10 years. I made these guards to keep all the mud and garbage off of the door hinges.
Reply
Old Jun 27, 2010 | 10:51 AM
  #19  
nielsenml's Avatar
Senior Member
 
Joined: Jun 2010
Posts: 881
Likes: 0
From: oregon
Year: 91
Model: Cherokee
Engine: 4.0
Default

Been running without them for over 10 years. I made these guards to keep all the mud and garbage off of the door hinges.
__________________

Sweet, Got my project for today, Thanks a million Radio!!
Reply
Old Jun 27, 2010 | 09:39 PM
  #20  
shooter5635's Avatar
Senior Member
 
Joined: Aug 2009
Posts: 853
Likes: 0
From: Carbondale, Illinois
Year: 2000
Model: Cherokee
Engine: Inline 6
Default

While driving back from my sisters i smelled burning rubber....so i pulled her over and sure enough that damn rubber mat under the engine compartment had finally rotted enough to drag on the ground...so thats gone now
Reply
Old Jun 27, 2010 | 10:59 PM
  #21  
Tural's Avatar
CF Veteran
 
Joined: Jan 2010
Posts: 3,379
Likes: 0
From: Forest, VA
Year: 1999
Model: Cherokee
Engine: 4.0 I6
Default

i took out the previous owner oh and the rear sway bar.
Reply
Old Jun 28, 2010 | 05:59 AM
  #22  
MadMike's Avatar
Seasoned Member
 
Joined: Mar 2010
Posts: 388
Likes: 0
From: North, Ga
Year: 1995
Model: Grand Cherokee
Engine: 4.0
Default

I removed the rear sway bar, carpet, inner fender liners, all the A/C crap, cooling fan(replaced with dual electric fans), spare tire (it was flat and way to small) and jack(to small). Replacing the spare with a 33" and the jack with a Hi-Lift as soon as I start my rear bumper.

Last edited by MadMike; Jun 28, 2010 at 06:02 AM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
extrashaky
Other Vehicles. Other Jeep models & cars and trucks of other makes
17
Jun 17, 2023 03:57 PM
xjcarolina
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Sep 29, 2015 08:43 PM
Battle
Modified XJ Cherokee Tech
13
Sep 29, 2015 12:29 PM
CJG
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Sep 28, 2015 03:46 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 09:14 PM.