What did you do to your Cherokee today?
Honorary Moderator
Joined: Mar 2010
Posts: 8,135
Likes: 16
From: Gilbert AZ/Las Cruces NM
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
did some work:
So this is for 96 and prior rear window or 84-01 side windows.
First clean your new window (mine came from a Wagoneer).

then instal your gasket around the window:

and make sure it is seated all the way around:

grab smaller diameter rode/twine/cord and wrap it around the gasket, this will help pull the gasket over the lip in on the hatch/body
enlist a little help and have them hold it while you go on the inside to seat the window

make sure he is holding good and tight

and then start pulling the cord and making sure the seal is seated properly

and enjoy your new window

tinting soon to be done by a professional to give my 5% in the back again
First clean your new window (mine came from a Wagoneer).
then instal your gasket around the window:
and make sure it is seated all the way around:
grab smaller diameter rode/twine/cord and wrap it around the gasket, this will help pull the gasket over the lip in on the hatch/body
enlist a little help and have them hold it while you go on the inside to seat the window
make sure he is holding good and tight
and then start pulling the cord and making sure the seal is seated properly
and enjoy your new window
tinting soon to be done by a professional to give my 5% in the back again
Made some quick disconnects for the door speakers. Might cut the hinges for removable doors after dinner if its still light out. Otherwise, that will be tomorrow's project.
Honorary Moderator
Joined: Mar 2010
Posts: 8,135
Likes: 16
From: Gilbert AZ/Las Cruces NM
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
if you did I would replace them with trailer connectors (can be had for $4 each). the spade terminals will not last long

I sat there wondering why my interior upholstery smelled like dirty-sock-stinky-feet while waiting for my Taco Grande Supreme to be made especially for me exclusively at Taco Bell.
CF Veteran
Joined: Sep 2010
Posts: 12,692
Likes: 6
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Originally Posted by RoosterXJ
New 33" BFG All Terrains
______ooooo /__l_l_,\____\,___ l_---l_l__l---[ ]llllll[ ] _.(o)_)__(o)_)--o-)_)
______ooooo /__l_l_,\____\,___ l_---l_l__l---[ ]llllll[ ] _.(o)_)__(o)_)--o-)_)
No, I don't lick fish.



Joined: Mar 2011
Posts: 11,169
Likes: 26
From: Northern Kentucky
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
Originally Posted by mrfajita
I actually used 4 pin Molex connectors from an old computer power supply. Had them laying around.
- Justin <><
CF Veteran
Joined: Jan 2011
Posts: 1,375
Likes: 3
From: Maine
Year: 2000
Model: Cherokee
Engine: 4.0L I6
Senior Member
Joined: Mar 2010
Posts: 693
Likes: 0
From: Carrollton, Georgia
Year: 1995
Model: Cherokee
Engine: 4.0 Liter High Output
Originally Posted by Defiance665
this weekend: napa full synthetic 10w30, napa silver filter, new passengers side ujoint.
It also got me pulled over and a misdemeanor... One headlight out, 2 unloaded/uncased (didnt even have ammo with me) .22 rifles in the back.
It also got me pulled over and a misdemeanor... One headlight out, 2 unloaded/uncased (didnt even have ammo with me) .22 rifles in the back.
On another note I parked my xj til I can get my other one hopefully before the end of the week and change out the trans


