What did you do to your Cherokee today?

Subscribe
Oct 16, 2016 | 06:23 PM
  #81361  
Installed new bumper and cleaned and painted differenial.
Reply 0
Oct 16, 2016 | 06:30 PM
  #81362  
Can someone point me to an exhaust set ups thread? I know there is a sounds sticky but I actually would like to see pictures of how people routed their pipes and what not.
Reply 0
Oct 16, 2016 | 07:07 PM
  #81363  
I worked on the wife's WJ in the gravel driveway. I forgot how much that sucks. My xj is still hogging up the garage. I changed the back pads and test drove it. Now the one wheel smokes after about 5 miles. I guess the caliper needs done now too. I fixed the heat shield above the muffler, it kept slapping the muffler while driving down the road. I also found out that the heat shield on the down pipe acts like a catcher up in the snow belt. Once I pulled on it the clips that were welded on the pipe peeled back making nice quarter size holes. Go figure one was right on the bend. I fixed that by cutting a piece of pipe that was already bent at a 45. I put that right over top the bad section and welded away. It looks ugly, but there is not much room to weld without removing the whole section.
Reply 0
Oct 16, 2016 | 07:18 PM
  #81364  
Quote: I worked on the wife's WJ in the gravel driveway. I forgot how much that sucks.
Break down a cardboard box and lay on it. I used to keep one behind the bench seat in my Comanche
Reply 0
Oct 16, 2016 | 07:27 PM
  #81365  
My "gravel creeper" is a piece of 1/4" plywood, painted light turquoise
Reply 0
Oct 16, 2016 | 07:45 PM
  #81366  
Napier Hood Vents and Fender Flares
Quote: Installed Napier hood vents and fender flares.
Wow, that turned out really well!
Reply 0
Oct 16, 2016 | 08:44 PM
  #81367  
Got the new exhaust installed today!

Reply 0
Oct 16, 2016 | 08:55 PM
  #81368  


Lift kit installed this week and removed trim and pinstripes today. Will probably remove the rest of the decals next weekend.
Reply 0
Oct 16, 2016 | 09:20 PM
  #81369  
Quote: I worked on the wife's WJ in the gravel driveway. I forgot how much that sucks.
Quote: Break down a cardboard box and lay on it. I used to keep one behind the bench seat in my Comanche
I use the giant foam puzzle pieces intended as flooring for a kids play room or whatever. Waterproof too
Reply 0
Oct 16, 2016 | 09:57 PM
  #81370  
Got my ZJ disk brakes installed. Just got to throw the diff cover on, install the Proportioning valve and bleed the brakes tomorrow and I'm done! Pics tomorrow!
Reply 0
Oct 17, 2016 | 06:41 AM
  #81371  
Quote: Can someone point me to an exhaust set ups thread? I know there is a sounds sticky but I actually would like to see pictures of how people routed their pipes and what not.
questions:
https://www.cherokeeforum.com/f67/al...o-here-103854/

videos and sound clips:
https://www.cherokeeforum.com/f67/ch...thread-180356/

Quote: Got the new exhaust installed today!

https://m.youtube.com/watch?v=g1ObQcTwvAg
Sounds good
Reply 0
Oct 17, 2016 | 07:00 AM
  #81372  
Quote: Got my ZJ disk brakes installed. Just got to throw the diff cover on, install the Proportioning valve and bleed the brakes tomorrow and I'm done! Pics tomorrow!
You'll love it!

My only regret is having waited so long to do the upgrade.
Reply 0
Oct 17, 2016 | 10:29 AM
  #81373  
Quote: You'll love it! My only regret is having waited so long to do the upgrade.
gonna go ahead and grab the booster and master cylinder today as well!
Reply 0
Oct 17, 2016 | 12:41 PM
  #81374  
Quote:
questions:
https://www.cherokeeforum.com/f67/al...o-here-103854/

videos and sound clips:
https://www.cherokeeforum.com/f67/ch...thread-180356/

Sounds good
My hero, thanks basslicks!
Reply 0
Oct 17, 2016 | 02:17 PM
  #81375  
replaced all of my interior lights with LEDs
Reply 0