What did you do to your Cherokee today?

Subscribe
Sep 9, 2016 | 12:04 AM
  #80551  
Actually, I think XJ Wonders has leather in his wheeling rig and cloth in the driver, he says the leather dries out better if he gets them wet.
Reply 0
Sep 9, 2016 | 12:20 AM
  #80552  
Quote: Full POWER seats too.
YMMV, but I would suffocate in that thing with the crank windows.
I NEED my windows down.
Reply 0
Sep 9, 2016 | 12:23 AM
  #80553  
Quote: YMMV, but I would suffocate in that thing with the crank windows.
I NEED my windows down.
The crazy thing is, those handles spin and make the windows go down
Reply 0
Sep 9, 2016 | 12:30 AM
  #80554  
Quote: The crazy thing is, those handles spin and make the windows go down
Not as pretty as the push button flavor.
Reply 0
Sep 9, 2016 | 12:49 AM
  #80555  
Quote: Not as pretty as the push button flavor.
well, id say the sacrifice of having crank windows in order to have easier to remove doors for maximum air flow is worth it. Haha
Reply 0
Sep 9, 2016 | 01:49 AM
  #80556  
Quote: YMMV, but I would suffocate in that thing with the crank windows.
I NEED my windows down.
x2 on that. Crank windows are fine.. especially if it's a 2-door. But crank windows on a 4-door are very inconvenient.

Quote: well, id say the sacrifice of having crank windows in order to have easier to remove doors for maximum air flow is worth it. Haha
I'm guessing you haven't heard of the ZJ door plugs mod...


Reply 0
Sep 9, 2016 | 09:24 AM
  #80557  
Quote:
x2 on that. Crank windows are fine.. especially if it's a 2-door. But crank windows on a 4-door are very inconvenient.

I'm guessing you haven't heard of the ZJ door plugs mod...
Please explain. As a 2door owner here, I would like to convert to power windows but removing my doors always makes me wait.
Reply 0
Sep 9, 2016 | 09:42 AM
  #80558  
Quote: Please explain. As a 2door owner here, I would like to convert to power windows but removing my doors always makes me wait.
there's a write up somewhere. Basically you get the plugs from a zj with the infinity audio system and then match the wires up on either side and then it will be an easy plug and unplug. I don't know if you need the infinity plug for the 2 door or if you could use just the normal one.
Reply 0
Sep 9, 2016 | 09:48 AM
  #80559  
Quote: You don't sit naked in your Jeep do ya?
Uhhhhhhh I can't even count the times. Memories of my wife and I dating and driving out to fields and "looking at stars".
Reply 0
Sep 9, 2016 | 11:38 AM
  #80560  
Installed a Flowmaster Super 44 and Performance-Curve Cat (new O2 sensors as well), all 2.5" and Stainless Steel just because.
What did you do to your Cherokee today?-exhaust.jpg
What did you do to your Cherokee today?-exhaust-2.jpg
Also decided to lose the tail-pipe after reading several posts here.
What did you do to your Cherokee today?-exhaust-3.jpg
Love how it sounds and looks, YUGE improvement over stock.


Reply 0
Sep 9, 2016 | 12:13 PM
  #80561  
Quote: Installed a Flowmaster Super 44 and Performance-Curve Cat (new O2 sensors as well), all 2.5" and Stainless Steel just because.
Attachment 293982
Attachment 293983
Also decided to lose the tail-pipe after reading several posts here.
Attachment 293984
Love how it sounds and looks, YUGE improvement over stock.
What did that run you if you dont mind my asking?
Reply 0
Sep 9, 2016 | 12:16 PM
  #80562  
Quote: x2 on that. Crank windows are fine.. especially if it's a 280Z.
FIFY and I'll agree.
Reply 0
Sep 9, 2016 | 12:18 PM
  #80563  
Quote: What did that run you if you dont mind my asking?
2 Benjamins.
Reply 0
Sep 9, 2016 | 12:52 PM
  #80564  
Quote: 2 Benjamins.
Not bad! have you done anything with the header or downpipe?
Reply 0
Sep 9, 2016 | 12:54 PM
  #80565  
Quote: Not bad! have you done anything with the header or downpipe?
not yet but I've been researching.
Reply 0