What did you do to your Cherokee today?
09-07-2016, 05:10 PM
CF Veteran
Join Date: May 2015
Location: San Antonio, TX
Posts: 1,472
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L H.O.
09-07-2016, 06:35 PM
CF Veteran
Join Date: Jan 2010
Location: St Augustine Florida
Posts: 1,087
Likes: 0
Received 1 Like
on
1 Post
Year: 1992
Model: Cherokee
Engine: 4.0
did a major Performance upgrade today
Yep ya read that right.. I can not believe the differance the jeep feels in acceleration and braking... getting rid of at least 75lbs of rotating mass does wonders...
Last edited by Hommersimpson; 09-08-2016 at 10:43 AM. Reason: people can not see the wing nut holding tire on
09-07-2016, 06:41 PM
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,915
Received 1,530 Likes
on
1,241 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
09-07-2016, 07:18 PM
CF Veteran
Join Date: May 2015
Location: San Antonio, TX
Posts: 1,472
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L H.O.
09-07-2016, 10:42 PM
THE Admin
Join Date: Sep 2010
Location: Lantana, Fl
Posts: 34,036
Received 231 Likes
on
187 Posts
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
09-07-2016, 11:01 PM
CF Veteran
Join Date: Jul 2012
Location: San Antonio, TX
Posts: 4,104
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L
the rad is a 2 core 19"x22" aluminum unit, i cut out about 2" from the lower support, the lower mount is 1.5 14g square stock, with 16g wing i cut out of some plate, the top has a a hole for the fill neck, i welded the factory angle piece to the core support as apposed to the bolts. the cooler is a factory ferd explore unit with built in tabs so i bent the tabs and welded in some pins for the cooler to center on when the support is bolted down, then i drilled some new holes for the volvo fan shroud to bolt to the support with the factory jeep fasteners
i just need to clearance the hood for the fill neck
and fab a block off plate for the open sides of the cooler to force air over the cooler
most current pic
Last edited by cleenrob; 09-07-2016 at 11:05 PM.
09-07-2016, 11:04 PM
THE Admin
Join Date: Sep 2010
Location: Lantana, Fl
Posts: 34,036
Received 231 Likes
on
187 Posts
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
the rad is a 2 core 19"x22" aluminum unit, i cut out about 2" from the lower support, the lower mount is 1.5 14g square stock, with 16g wing i cut out of some plate, the top has a a hole for the fill neck, i welded the factory angle piece to the core support as apposed to the bolts. the cooler is a factory ferd explore unit with built in tabs so i bent the tabs and welded in some pins for the cooler to center on when the support is bolted down, then i drilled some new holes for the volvo fan shroud to bolt to the support with the factory jeep fasteners
i just need to clearance the hood for the fill neck
most current pic
Attachment 293904
i just need to clearance the hood for the fill neck
most current pic
Attachment 293904
09-07-2016, 11:06 PM
::CF Administrator::
I mean granted, it's not the best place for it but just be careful until you can safely put it back inside, thats all. Don't take it to heart but the majority of us are family men/women ourselves and speak up if we see something that looks unsafe. So let's just please move on.
In other news, I stretched her new legs today for the first time...
09-07-2016, 11:07 PM
::CF Administrator::
the rad is a 2 core 19"x22" aluminum unit, i cut out about 2" from the lower support, the lower mount is 1.5 14g square stock, with 16g wing i cut out of some plate, the top has a a hole for the fill neck, i welded the factory angle piece to the core support as apposed to the bolts. the cooler is a factory ferd explore unit with built in tabs so i bent the tabs and welded in some pins for the cooler to center on when the support is bolted down, then i drilled some new holes for the volvo fan shroud to bolt to the support with the factory jeep fasteners
i just need to clearance the hood for the fill neck
and fab a block off plate for the open sides of the cooler to force air over the cooler
most current pic
Attachment 293904
i just need to clearance the hood for the fill neck
and fab a block off plate for the open sides of the cooler to force air over the cooler
most current pic
Attachment 293904
09-07-2016, 11:13 PM
CF Veteran
Join Date: Jul 2012
Location: San Antonio, TX
Posts: 4,104
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L
thanks guys, the ls swap really been kicking my *** haha
im sure my attitude wi;ll be different once its "done" but i kind wish id refreshed the 4.0 and bee done with it already haha
im sure my attitude wi;ll be different once its "done" but i kind wish id refreshed the 4.0 and bee done with it already haha