What did you do to your Cherokee today?
Member
Join Date: Dec 2012
Location: Orange County, CA
Posts: 169
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L HO
"Has anyone had to hunt down the OEM XJ clutch before? Would I have better luck at NAPA or online?"
NAPA. #272318 is the OEM replacement. Or #272310 is the hvy duty one used on the 2.5L engine equipped XJ's. It's kind of loud but I don't mind it and probably not really necessary IMHO.
NAPA. #272318 is the OEM replacement. Or #272310 is the hvy duty one used on the 2.5L engine equipped XJ's. It's kind of loud but I don't mind it and probably not really necessary IMHO.
Lower radiator hose where it connects to the water pump. It's either that or the gasket didn't seat right, that's definitely the area the leak was coming from and the tstat housing looks sealed up tight. All hoses are brand new. Small leak in the parking lot of the grocery store after about 10 minutes of normal city driving, after 15 more minutes I parked it in my driveway and no further leaks, could it be just some weird break-in of the water pump where it pukes a little bit from the weep hole? I've had new (non-remanned) parts do similar weird stuff and eventually it just went away. Maybe the gasket hasn't had time to soak up coolant and swell, idk.
Last edited by ddurgin91; 09-14-2015 at 08:21 PM.
Senior Member
Join Date: Feb 2014
Location: Minnesota
Posts: 854
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0
If it's not a loose clamp and you need gasket adhesive I use this:
http://shop.advanceautoparts.com/p/p...rm=gasket+glue
http://shop.advanceautoparts.com/p/p...rm=gasket+glue
Senior Member
Join Date: May 2014
Location: Iroquois Ontario Canada
Posts: 946
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Received my shackle kit including lower bushing from **** ***** today, 23 days after ordering it. To my surprise the only bushings were the ones installed in the shackles. AKA the upper bushings. As if the wait for shackles wasn't long enough, now I have to hunt down leaf spring shackle bushings so I can get the XJ back on the road this weekend. That or pop for another month of insurance on the Stealth and drive it after the end September, something I or the previous owners have never done
I decided not to mention the store's name till after they have replied to my email expressing my disappointment with their service. I will give them till noon tomorrow then all holds are off.
I decided not to mention the store's name till after they have replied to my email expressing my disappointment with their service. I will give them till noon tomorrow then all holds are off.
Newbie
Join Date: Sep 2015
Location: Midlothian, Virginia
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2002
Model: Grand Cherokee
Engine: 4.0 I-6
I have never joined a group like this before. Bought 1989 Cherokee Laredo in 2006 and just recently traded her for a 2002 Grand Cherokee. Took the 02 to get the "Check Engine" light decoded and found that I have a vacuum leak and an unknown problem with my ABS. Will try to fix the vacuum leak with advice from this forum. Thank you!
CF Veteran
Join Date: Sep 2010
Location: Mercer County, NJ
Posts: 12,692
Likes: 0
Received 4 Likes
on
4 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Received my shackle kit including lower bushing from **** ***** today, 23 days after ordering it. To my surprise the only bushings were the ones installed in the shackles. AKA the upper bushings. As if the wait for shackles wasn't long enough, now I have to hunt down leaf spring shackle bushings so I can get the XJ back on the road this weekend. That or pop for another month of insurance on the Stealth and drive it after the end September, something I or the previous owners have never done
I decided not to mention the store's name till after they have replied to my email expressing my disappointment with their service. I will give them till noon tomorrow then all holds are off.
I decided not to mention the store's name till after they have replied to my email expressing my disappointment with their service. I will give them till noon tomorrow then all holds are off.
Senior Member
Join Date: May 2014
Location: Iroquois Ontario Canada
Posts: 946
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Chances are I will end up paying through the nose from Napa just so I can do the work.
For the record I could have ordered from the USA for a little less but decided to support a Canadian dealer
Seasoned Member
Join Date: Jan 2015
Location: Metro Detroit
Posts: 398
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Axles fell through but on the plus side, I finally got ahold of the guy with the bored throttle body. $30 and 3 minutes later, and I am on my way to more air flow! Just gotta pull the baffle from inside the tube from the airbox and I'm good to go!
CF Veteran
Join Date: Sep 2010
Location: Mercer County, NJ
Posts: 12,692
Likes: 0
Received 4 Likes
on
4 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Yeah the stores listing states "includes lower bushings" The bushings that come in the shackle is the upper bushing. The problem with me ordering from Quadratec or 4 Wheel Parts is that I am Canadian so I would never get the parts by Friday even the Canadian 4WP gets their parts in from the USA warehouse so ordering from them would just add even more time. Then there is the problem with my work hours, I am scheduled for over 60 hours a week till after October and this weekend coming up is the only time I have to work on it before the end of the month.
Chances are I will end up paying through the nose from Napa just so I can do the work.
For the record I could have ordered from the USA for a little less but decided to support a Canadian dealer
Chances are I will end up paying through the nose from Napa just so I can do the work.
For the record I could have ordered from the USA for a little less but decided to support a Canadian dealer
CF Veteran
Join Date: Oct 2013
Location: Denver
Posts: 1,589
Likes: 0
Received 1 Like
on
1 Post
Year: 99
Model: Cherokee
Engine: 4.0
Replaced my blower motor resistor. It has been out since I bought the damn thing >2 years ago! Ahhh, the normal sounds of a fan not on full f'in blast!
Newbie
Join Date: Sep 2015
Location: southern California
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
First Time Cherokee Owner
Just purchased '98 xj sport 4wd today, cant wait to start working on it. Everything is stock, hoping to go with bilstein 5100's and RE 3.5 coils and keep it on 31's. Open to any advice and guidance from people with similar builds. I'm still combing my way through the threads to make sure I do things the right way! Cheers!
Seasoned Member
Join Date: Jan 2015
Location: Metro Detroit
Posts: 398
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Just purchased '98 xj sport 4wd today, cant wait to start working on it. Everything is stock, hoping to go with bilstein 5100's and RE 3.5 coils and keep it on 31's. Open to any advice and guidance from people with similar builds. I'm still combing my way through the threads to make sure I do things the right way! Cheers!