What did you do to your Cherokee today?
Seasoned Member
Joined: Jul 2014
Posts: 389
Likes: 0
From: Albuquerque
Year: 2001
Model: Cherokee
Engine: 4.0L Inline 6
Pulled the old plugs, compression tested the cylinders (145-150 on all but #1!) installed new plugs, and added 3 quarts of oil. She purrs like a kitten now!
Changed my driver side ball joints. What a pita. Then I put it back together, went to put the brake rotor on and realized I put the dust cover on backwards. Had to take the hub back off and do it again. Took 5 hours to do one side and I broke 2 tools. Now I know how to do the passenger side though
Junior Member
Joined: Sep 2013
Posts: 53
Likes: 0
From: Stanardsville, VA
Year: 1998
Model: Cherokee
Engine: 4.0
Changed my fuel pump yesterday... Not sure if I even had an OEM one in mine when I changed it... Saw a small sticker that said "Airtex" on the top of the assembly...
Anyways, had to make some new tank hanger bolts, since the old ones snapped in two tying to remove the nuts...
Anyways, had to make some new tank hanger bolts, since the old ones snapped in two tying to remove the nuts...
CF Veteran
Joined: Nov 2013
Posts: 1,347
Likes: 0
From: Wetumpka, AL
Year: 1987
Model: Cherokee
Engine: 4.0



It's that time of the year. Oil changed, brakes bled, Valve cover/oil pan bolts checked, and the rest of the general maintenance done.
Happy thanksgiving everyone. Be safe in your travels for the holidays.
Seasoned Member
Joined: Apr 2013
Posts: 259
Likes: 0
From: Mass
Year: 2000
Model: Cherokee
Engine: 4.0
Seasoned Member
Joined: Mar 2014
Posts: 352
Likes: 0
From: Los Angeles
Year: 1999
Model: Cherokee
Engine: 4.0
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,578
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Went to the vineyard early today and found this insanely huge transmission cooler can't wait to install it. It measures 11"x11"x1" nothing beats a stacked plate design. Also it was 7 bucks.
Attachment 259593
Attachment 259593
Can you combine wine tasting with junkyard shopping? What a marketing concept!!!! I'm in.
Seasoned Member
Joined: Mar 2014
Posts: 352
Likes: 0
From: Los Angeles
Year: 1999
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Nov 2008
Posts: 7,874
Likes: 100
From: Northern Ontario, Canada
Year: 1990, 1999, 2000
Model: Cherokee
Engine: 4.0
(yesterday/today)flushed the heater core, replaced rad, thermostat, water pump and hoses and added some nice new coolant.
later, oil/filter and winter air in tires.
later, oil/filter and winter air in tires.
Seasoned Member
Joined: Mar 2014
Posts: 352
Likes: 0
From: Los Angeles
Year: 1999
Model: Cherokee
Engine: 4.0
What kind of radiator did you go with? I'm thinking when the time comes to replace my radiator with a all aluminum one I don't like plastic tanks.
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Bought 2 pairs of 3 ton jackstands and 1 pair of 6 tons that should reach my jeep a little better. I ran out of stands to put my 60/10.5 on.
Junior Member
Joined: Nov 2014
Posts: 53
Likes: 0
From: Oconto Falls, Wi
Year: 1994
Model: Cherokee
Engine: 4.0 HO
Changed my fuel pump yesterday... Not sure if I even had an OEM one in mine when I changed it... Saw a small sticker that said "Airtex" on the top of the assembly...
Anyways, had to make some new tank hanger bolts, since the old ones snapped in two tying to remove the nuts...

Anyways, had to make some new tank hanger bolts, since the old ones snapped in two tying to remove the nuts...

Seasoned Member
Joined: Nov 2011
Posts: 291
Likes: 1
From: Snohomish County, WA
Year: 1989
Model: Cherokee
Engine: 4.0L
Seasoned Member
Joined: Nov 2011
Posts: 291
Likes: 1
From: Snohomish County, WA
Year: 1989
Model: Cherokee
Engine: 4.0L
Attachment 259569
It's that time of the year. Oil changed, brakes bled, Valve cover/oil pan bolts checked, and the rest of the general maintenance done.
Happy thanksgiving everyone. Be safe in your travels for the holidays.
How do you use that filter with 3/4-16 threads?
Special adapter?
Does anyone know of a large capacity filter for the 20mm thread size?








