Probably but I didn't shim the rear end when I lifted so I'm going to measure the angles and see if I can get around the SYE if not oh well. Trying the cheaper route first.

 

Shims could make it worse with the stock rear drive-shaft. But are necessary with a SYE.
Could just be worn u-joints.

Good references for drivelines;
http://www.hotrodhotline.com/md/html..._harmonics.php

http://www.4crawler.com/4x4/CheapTri...OperatingAngle

 

All I did today was take a few pictures of my baby and look around for more parts. Still don't know where to begin with this build.

 

Posting the pictures is a good start. I am sure some of us will offer 'suggestions' on where to begin.
Providing you already replaced all fluids, hoses and belt.

 

Greased her up and finally checked and saw that my drivers door actuated is bad. Oh well. Got no issue using the key.

Also finally got a grinder again so tomorrow ima prep the spare leaf for project strong ***

 

Got the new rad and thermo in. Just waiting on it to set up now. Cross my fingers for no leaks!

 

Replaced rear hatch lift support and use the old ones for the hood.
https://drive.google.com/file/d/0B2C...it?usp=sharing

 

Cleaned up the wheels I bought yesterday.

 

Nice. One of my favorite modifications.

 

Mine too.

 

Washed it

 

Ravine's.... sweet! A set of 5, you got lucky.
I run a 1" hubcentric and wheelcentric spacer with them.
Please let everyone know how you acquired them and how much $.
There is interest on other threads.
I found 5 at a used tire shop for $200.

 

I picked up a set of ravines offa CL for 250 with a set of 60% tread bfg all terrains and a full size/tread spare
Then sold them for the same price minuse the spare (which I kept)

 

Pulled the rotors and pads from the parts truck a couple weeks ago, they were barely used but sitting for some time. Did a clean up with stainless wire cup brush and exchanged for the worn out fronts on the Peep.

 

do you have the driver lite removed for a CAI?? cant see if its there from the pic angle

couldn't sleep last night so from 4:30am-6am...decided to tire myself out

replaced cowl, driver front flare, removed door molding from both sides,sanded off pinstripe, removed roof protective strips..