Lightly sand the edges of the butterfly valve in your bored TB so they aren't 90°. The smoother transition for the air will alleviate your whistle.

 

Nice work
I have the same intake, it's louder with the defroster on but I don't get a whistle (mine sounds like Darth Vader). Make your heat **** is not on the defroster setting and see if it gets quieter.

 

I have a spacer and a Rusty's air intake. It whistles but I like it. The looks you get from ricer's when you pass them uphill whistling all the way....

 

Thanks! I will check that out. Its a Leigh bored TB and I understand he does good work to avoid the whistle.

It could very well be the intake as well. The actual hole for the Spectra intake is an oval. I forgot my body saw so I had to use a hole saw for the firewall. I am going to fix that, should help with airflow/turbulance as well.

I am going to try and realign the TB. I made the Idle Air side perfectly flush and the opposite had the lip, so it might be the cause.

 

Laugh now stock wheel wells, your days are numbered. After a year I've almost decided what to do with you! LMAO

 

ha, you got large tires and a small wheel well. I have large wheel well and small tires. Wanna trade lol

 

I'll be going bigger soon, then they're yours.

 

Tore the passenger side door panel off to get the window back up. The regulator is about gone. Ripped out (accidentally) the wires on the speaker but its ok they will get replaced. But that gave me the motivation to tear apart the dash and get the stereo to work. After an hour an a half of unscrewing the wire harness from what the PO did, the jeep finally has tunes! Well in three speakers for now.

 

Cut the fenders

 

I received my APN Header took a few pics of it then sent it off to get ceramic coated

 

Is my plan soon too. Once repairs are done, time to save for tires. Ain't rushing it too much. Wanna make sure all maintenance is done before winter. Least my AC works now

 

Did a coolant flush and thermostat change today. Also changed my fan clutch and o2 sensor. Decided I would take it out on a little trail.

 

Drove it 300+ miles today. 1st time I've taken it that far after 4x4 conversion. Handled great and no issues on the highway. Slight vibes about 70mph.

 

Tested out my recently installed daystar extended bumpstops. Works like a charm.


Also loosened all the star bit bolts holding the doors on. Stripped one and had to use a chisel hammer combo to get it out. Taking the doors off tomorrow for a cooler ride to work. Née to hit the junkyard for some mirrors to bolt on.

 

Cut two inches out of the muffler-side of my tail pipe. It doesn't rattle anymore!