Be careful on how many leafs you use if you're doing a bastard pack, I used two and got about an inch to much. I hope it settles enough

 

Nothing!! Just waiting on my 33's. Still need to finish painting it.

 

Finished welding up my floor pans

 

Twins ;]

 

SWEET

 

Getting my parts list together for my stroker build

 

Drove it, cleaned up some wiring under the hood, started fiberglassing an overhead console that I fabbed up.

 

Cleaned and re painted my rusty nuts, and mounted the tires on my new build!!

 

Today i just washed her but did out in off road lights a snorkel and install a crawler bumper

 

Attempted to install new wheel cylinders, brake shoes, drums, and hardware. The only thing I got on way the cylinders and hardware. I put the new shoes and took them back off about ten different times. Switched them from side to side and same for the new drums. I now the drums are correct because their stamped 9.055 and I called the parts store to cross reference the shoes to make sure they are for 9" drums. No idea why none of the new wanted to fit but the old went back together without a hitch.

 

Just my old arms? Got em sold already. Lol

 

I drove her alot. To jersey to see future inlaws for Easter then to long island to see my family. Hell of a drive is all I gotta say

 

You say Jersey like it's a bad thing..

Well yesterday while working in NYC lost my turn signals (hazards did work) but started to work from time to time at the end of the day. Did some research last night and found that the soldier connections have a tendency to open in the flasher module this was after the sticker shock of the cost of replacing said module. So today I pulled the lower dash apart and got out the module. Opened it up, and resoldiered all the connections to the base of the module then reinstalled. So far so good. I have turn signals again.

 

Lol not to go off topic but I'm in jersey it seems more than new York. And my fiance, she is from jersey.

 

I'd get rid of those lol. They have a tendency to snap in half. Happened to me and it was a fun time torching them off and replacing some wheel studs.