What did you do to your Cherokee today?
CF Veteran
Joined: Dec 2011
Posts: 1,467
Likes: 0
From: Wilmington, nc
Year: 1998
Model: Cherokee
Engine: Inline 6
Originally Posted by steelrfn
sanded and painted the stock rims black, then welded on some sheet metal and bondo'd up the rust before starting to rattle can bedline the whole thing. I figure it won't come out perfect, but it has to beat the multicolor shot finish with the fading clear coat and rust holes.
I finished the whole front clip today and I must say it actually looks pretty sharp.
And the best part is I can carry a can in the back for $9 emergency paint touch ups
I finished the whole front clip today and I must say it actually looks pretty sharp.
And the best part is I can carry a can in the back for $9 emergency paint touch ups
Member
Joined: Sep 2010
Posts: 191
Likes: 3
From: Albuquerque, NM
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0 XJ
I put on my new shackles and then my rear shocks. I bought 1990'ish Comanche rear shocks and used my old rear swaybar mounts as bar pin eliminators. With the BPE's I get an inch and the Comanche shocks give me another 3 inches "Of flex". Next check I am getting new leafs. I also got some Ravine wheels, cleaned, scuffed, masked and painted them black for my 31 Trail Diggers. Tomorrow the front springs and the quick disconnects get installed.
Last edited by Modrod; Mar 19, 2012 at 05:45 AM. Reason: Pictures
they make my murdered out look almost complete
Seasoned Member
Joined: Sep 2010
Posts: 331
Likes: 0
From: Parma Ohio
Year: 1998
Model: Cherokee
Engine: 4.0
Bar pin eliminators in the rear. Note to self/ everyone; the first one took me hours trying to fight the bushing into the top mount. The second one I mounted the mount in the shock then installed and it took me about 20 minutes
Junior Member
Joined: Mar 2011
Posts: 90
Likes: 2
From: Southern cali
Year: 88
Model: Cherokee
Engine: 4.0
