Cherokee Chat General non-tech Cherokee chat
XJ/MJ/ZJ/WJ

Turn signals

Thread Tools
 
Search this Thread
 
Old May 29, 2011 | 07:58 PM
  #16  
dterrysport's Avatar
Thread Starter
Newbie
 
Joined: Aug 2010
Posts: 23
Likes: 0
From: c-bus
Year: 1999
Model: Cherokee
Engine: i-6
Default

Thanks everyone 14.00 and I'm back in business that flasher was a quick fix
Reply
Old May 30, 2011 | 05:29 PM
  #17  
Zipperheadxj00's Avatar
Member
 
Joined: Apr 2011
Posts: 211
Likes: 0
From: Glo Pt,VA/Stewartstown,PA
Year: 2000
Model: Cherokee
Engine: 4.0L I6
Default

Dterry,

Could you take a pic and "map" to where that relay goes? I'm having a little trouble with it! Thanks!
Reply
Old Jun 1, 2011 | 09:38 AM
  #18  
Zipperheadxj00's Avatar
Member
 
Joined: Apr 2011
Posts: 211
Likes: 0
From: Glo Pt,VA/Stewartstown,PA
Year: 2000
Model: Cherokee
Engine: 4.0L I6
Default

Nevermind...

For all the 97+ models, the relay for this is under the steering column. You have to remove the panel under the column, and remove the metal plate behind that. To the left you will see a gray box that has a wire plug going into it. Directly above that is a small plug with wires, if you swivel that around, you'll notice that it's a relay on the other side of the plug. This is the relay that needs to be replace.

It's alot easier once you find it.
Reply
Old Jun 16, 2011 | 10:43 PM
  #19  
98_XJ Sport's Avatar
Senior Member
 
Joined: May 2011
Posts: 609
Likes: 2
From: Flagstaff, Arizona
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Default

I found the packaging its a 12 Volt 5 Terminal Electronic Flasher #EP27
Reply
Old Jun 16, 2011 | 11:16 PM
  #20  
shade_tree's Avatar
Junior Member
 
Joined: Jun 2011
Posts: 44
Likes: 0
Model: Cherokee
Default

hi I'm new to the forum i just got a "new to me" 96 Cherokee and I'm also having turn signal issues. when i hit the flashers all of them flash except the front left. all the bulbs are good. but when i try the signal switch nothing works.
At first i thought it was the switch. but the wipers and sprayer work. just no flashers.
I've looked for the 5 prong switch you guys are talking about but all i find is two silver relay type fuses. and a spot to the left for a 6 prong "something". could that be it?
Reply
Old Jun 17, 2011 | 12:53 PM
  #21  
Gee oh Dee's Avatar
CF Veteran
 
Joined: Sep 2010
Posts: 21,168
Likes: 5
From: Milwaukee, WI
Year: 1987
Engine: Check
Default

Originally Posted by shade_tree
hi I'm new to the forum i just got a "new to me" 96 Cherokee and I'm also having turn signal issues. when i hit the flashers all of them flash except the front left. all the bulbs are good. but when i try the signal switch nothing works.
At first i thought it was the switch. but the wipers and sprayer work. just no flashers.
I've looked for the 5 prong switch you guys are talking about but all i find is two silver relay type fuses. and a spot to the left for a 6 prong "something". could that be it?
Since yours is a pre 97 it'll be in a different spot.
Reply
Old Jun 17, 2011 | 06:38 PM
  #22  
shade_tree's Avatar
Junior Member
 
Joined: Jun 2011
Posts: 44
Likes: 0
Model: Cherokee
Default

Originally Posted by Gee oh Dee
Since yours is a pre 97 it'll be in a different spot.
Well I took the dash apart and mine is wired like a97 I have a gray slot and a red slot the gray one clicks when the hazards are on. I replaced the multifunction switch and now all the lights flash.except the turn signals

Last edited by shade_tree; Jun 17, 2011 at 06:40 PM. Reason: Forgot info
Reply
Old Aug 4, 2011 | 09:28 AM
  #23  
shade_tree's Avatar
Junior Member
 
Joined: Jun 2011
Posts: 44
Likes: 0
Model: Cherokee
Default

Just to touch base on this problem. Didn't go give mopar a bunch of money for a signal relay in red plastic. I just wired the turn signals to use the flasher relay. Its been fine ever since. Thanks for all the input
Reply
Old Aug 4, 2011 | 09:29 AM
  #24  
shade_tree's Avatar
Junior Member
 
Joined: Jun 2011
Posts: 44
Likes: 0
Model: Cherokee
Default

When I get a chance I'll post a pck of how to do it and every ones turn signals can work again!
Reply
Old Aug 4, 2011 | 10:41 AM
  #25  
LittleMeanPurpleMachine's Avatar
Member
 
Joined: Mar 2011
Posts: 208
Likes: 1
From: Edmonton, Alberta, Canada
Year: 1998
Model: Cherokee
Engine: 4.0 I6
Default

Thanks guys just called crapy tire and they have the flasher for $22 just a bit more expensive up here in Canada even though our dollar is worth more.
Reply
Old Aug 4, 2011 | 11:06 AM
  #26  
Gee oh Dee's Avatar
CF Veteran
 
Joined: Sep 2010
Posts: 21,168
Likes: 5
From: Milwaukee, WI
Year: 1987
Engine: Check
Default

Originally Posted by shade_tree
When I get a chance I'll post a pck of how to do it and every ones turn signals can work again!
Please do.
Reply
Old Aug 4, 2011 | 12:56 PM
  #27  
LittleMeanPurpleMachine's Avatar
Member
 
Joined: Mar 2011
Posts: 208
Likes: 1
From: Edmonton, Alberta, Canada
Year: 1998
Model: Cherokee
Engine: 4.0 I6
Default

Is this it? Mine dose not have #EP27 on it.
Attached Thumbnails Turn signals-image-2064801932.jpg   Turn signals-image-3682803639.jpg  
Reply
Old Aug 4, 2011 | 04:16 PM
  #28  
shade_tree's Avatar
Junior Member
 
Joined: Jun 2011
Posts: 44
Likes: 0
Model: Cherokee
Default

^ yeah yours is the old model.
The pic that shows the front of the relay center is color coordinated. The red one is for your turn signals. This is supposed to be 97+ models but some 96 sports were issued this as a trial. The other pic is the same thing just flipped 180°. If you look closely at the wiring you can see my little jumper I put in there its the red 16° piece. All you need is about an inch and a half jump the two slots and presto you have turn signals... Only downfall to this method is your signal lamps will now work with the key off
Attached Thumbnails Turn signals-forumrunner_20110804_161625.jpg   Turn signals-forumrunner_20110804_161648.jpg  
Reply
Old Aug 4, 2011 | 05:34 PM
  #29  
LittleMeanPurpleMachine's Avatar
Member
 
Joined: Mar 2011
Posts: 208
Likes: 1
From: Edmonton, Alberta, Canada
Year: 1998
Model: Cherokee
Engine: 4.0 I6
Default

I bought a replacement after work changed it in the parking lot and still did not fix my problem. When i put my hazards on everything is fine, when I put my left signal on everything is fine, but when I put my right signal on the right front comes on but both the right and left come on in the back. Any help would be appreciated.
Reply
Old Aug 4, 2011 | 05:35 PM
  #30  
LittleMeanPurpleMachine's Avatar
Member
 
Joined: Mar 2011
Posts: 208
Likes: 1
From: Edmonton, Alberta, Canada
Year: 1998
Model: Cherokee
Engine: 4.0 I6
Default

I have a 98 by the way and I think it's different.
Reply



All times are GMT -5. The time now is 10:36 PM.