I think im going to rebuild it myself ive always been one for a challenge,i looked at the rebuild kit,it doesent look like it would be that hard,while im at it now would be a good time to put the RV cam in it and 3'' lift kit i planned on doing in early spring.
Once again thanks for all your in-put it was very helpful

 

No problem. When you start doing it don't be afraid to post up any questions or you can pm me.

 

Today just for the heck of it i thought id drive my jeep one more time,and i drove it and it was shifting fine until i put it into 1st gear manually than to 2nd and so on but thats when it stops going into 2nd or 3rd before i did that it was shifting really good,do you think its possible that it has something to do with shifter or cable cause awhile back i had my console off and when i put it back on it wouldent go all the way forward into park so i had to take it off apperently i dident have it on right but thinking back thats when all my problems started with my tranny could i have done something to the cable

 

sure. Definitely it is possible.

It may not be set right. or possibly inbetween gears. I would double check all that first. Also where it hooks up to the transmission and make sure everything is adjusted properly.

 

Hi its me again i was checking fuses in the power distribution center under the hood and found a blown fuse its a 10 amp and it reads 10 amp tcu/srs/dag what does that mean just curious