Tire Size Help?

Subscribe
Jun 21, 2015 | 07:39 PM
  #1  
Maybe there is already a thread for this but I have not seen it. I have a 96 Cherokee sport auto with a 3.5" lift on it with 31" tires. Can I run 33's without getting a bigger lift? Maybe some fender trimming? Anything helps. Pics of jeeps with a similar setup would also be awesome! Thank you in advance
Reply 0
Jun 21, 2015 | 09:52 PM
  #2  
on my 98 im running narrow 33's with 3.5"
cut the hell out of it and it'll go
but it might be different on the older ones
your gonna wanna gear it. what rear axle?
Name:  IMG_20150310_104222_zps9sequkyx.jpg
Views: 48
Size:  189.7 KB
Name:  IMG_20140714_151656_zps21228770.jpg
Views: 61
Size:  181.7 KB


Reply 0
Jun 21, 2015 | 10:19 PM
  #3  
33x12.5 on super wide wheels with 3" lift and cut fenders Tire Size Help?-image-1080493603.jpg

Tire Size Help?-image-621108771.jpg

Yes, this has been covered many, many times.


Reply 0
Jun 21, 2015 | 11:29 PM
  #4  
I have 2.5" and 33s. going to 35s once my new axles are built and swapped. The tan jeep is my friend's. 1" of lift with 33s, going to 35s once his new axles are built as well. The angle grinder is your friend if you want tires to fit.

Tire Size Help?-20141109_142356_hdr.jpg   Tire Size Help?-11429719_983242781700353_468131986773395000_n.jpg  

Reply 0
Jun 21, 2015 | 11:50 PM
  #5  
So the short answer is yes.

Trimming will get you there.
Reply 0
Jun 22, 2015 | 12:17 PM
  #6  
3" Rustys full leaf/coil (for winch/bumper combo) lift with 33x12:50x15's (actual height new 33.27") Wheels 15x8" with 3.75" of BS stock LCA's.

Name:  JeepafterTirecarrierbumper004_zpsfe31e62a.jpg
Views: 47
Size:  93.9 KB


Reply 0
Subscribe
Currently Active Users (1)