jeepfreak28

Can you run 30" tires stock on an xj without to much rub?

Tural

yupp. check the pics of my blue one.

01limited

i just put 30x9.50 on mickey thompson sidebiters and they rubbed on my bumper a little when i hit a bump turning more than half way but they have allot of backspacing. i just had to trim the inside lip off the bumper and they are fine

xjmuddigger

theyll fit,i had 30's on mine but my fenders r trimmed so i had minimal rubbin,but i did rub when i went thru ditches tho

jeepfreak28

Well I am just Gunna kinda be running them as temps until I get the lift then they won't rub

jeepfreak28

Here's what I have should I leave the wheels or get some other black ones when I lift it?

xjmuddigger

whats the offset on them rims? 4"?,and how wide r the rims?

Reefmike

I have 30's with a 2" lift. If I hit a dip or speed bump too hard I have to reinstall one of my rear flares.
The front seems ok as the sway bar keeps it from flexing far enough to rub.

jeepfreak28

The rims are stock jeep still wheel i think they are 7" or 8" wide not sure on offset

xjmuddigger

well since they r only 30's that wouldnt be an issue

jeepfreak28

Yeah knew that I was just asked if anyone liked the look

The Rooster

I have 30's on my 90 not trimed on stock rims with no rub at all

jbarger4

I also had 30 9.5 bf ats on my 96 with no lift and no rubing and my shocks where totaly junk

jeepfreak28

O really? Cause I was looking at bf ats and that's good to know they don't rub

jbarger4

Well they did touch the lcas when at full lock but they did not touch the fenders really close sometimes when off road