Hey guys just wanted to see if any body else had systems in their XJ. Heres mine, two 12" kicker L5s with 1,500 watts going to each. whole thing is sound deadened or else it would rattle the jeep apart. need some new door speakers thinking about puttion in 6.5 in the front and 6x9s in the top.



lets see some pics of them to

 

I have a 12 inch rockford with a 150 watt rockford amp. I also have JL 6.5's all around and a JVC head unit (which is a piece of crap)

 

6x9's won't fit without modification to the sound bar. Just tried it today. I had to use 6.5" all the way around

 

alpine amp 500 RMS and 1000 Peak with a single Orion XRT 12 with a ported box. hits pretty hard for a single 12.

 

i no that the 6x9s wont fit but ill make them and im putting them in a sound bar not a hatch it'll be alot easier in the sound bar

 

Ive had many systems this being one of the oldest cheapest yet most reliable set up ive had for many years and it still pounds for what it is.. 2 12" xplod subs powered by 500RMS 1200W peak xplod amp. Ive got 5- 1/4" FLI Audios in the doors n rear hatch just gotta add in my tweets to my doors. Old Alpine for a deck. Being a 20 yr old vehicle thatl be wheeled soon i didnt go with buying all new stuff rather use what i got kickin around

 

Two cadence wild beast 12s. Cadence 1200w amp with capacitor and 5x7 two way cadence speakers. No longer in the jeep though.

 

I have two Pioneer 12s (1300 watts each) in a vented kicker box with a 1500 watt kenwood amp. Sony xplod head unit and sony 5 inch door speakers. Nice system for under $300

 

two 9500 MTX 10's sledgehammer box-powercoustic 2000 watt amp and 6.5 mtx component speakers with 2011 pioneer premier deck

 

got one JL 12w6 in a sealed box on an alpine mrp-m500. cheap jvc head unit and kenwood components up front and co-ax in the rears all 6.5". soon to be upgraded to 2 w6s on a fosgate bd1000 and an alpine m300 4 channel amp. extra battery and upgraded alternator. got the big three done just the other day. heres a few pics of the build. didnt want just a box floppin around so i extended the baffle and top to fit the rear contours and wedge in tight. happy with the sound and clean appearance. cant wait for my 2nd one


^^visual of how its built. shows its not just a huge box lol


^^ baffle jigged and built


^^carpeted and got it all installed


^^other view

 

I don't mean to be a nit picker, but you should really take it out and make the internal box bigger, by almost 2 times as big for maximum sound and quality

 

jls website says recomended enclosure for sealed is 1.25 cubes.

soo..8.5 x17.5 x15.5 =2305.625 cubic inches.
divide by 1728 to get cubic feet and that gives you 1.334
minus .09 for the subs displacement comes to 1.244 cubic feet.

damn near perfect and makes your vision blurry when the bass drops.

when i add the 2nd sub it will be over double the size and i will port it tuning it to about 35hz.

 

MTX, Jackhammer amp, 10" Thunder marine speaker, (currently standing up well to the dog drool on road trips).amp was on good sale and I bought the max warranty, covered for all perils. in for 2 years and still kickin it. Runs with Pioneer 5 1/4 two ways (poly faced speakers) in front and rear door stock locations, door speaks are poly cone back proteted. Sony Xplod deck with front aux and usb inputs.

 

wait, so thats a 10" sub? for some reason i thought it was a 12"
My bad man lol

 

its a 12w6 lol

heres the link to the sub. click sealed enclosure specs. shocked me at how small the box needed to be for it. but built it to that and it sounds phenominal lol

http://www.jlaudio.com/12w6v2-d4-car...-drivers-92121