two mods....inside fishing pole holder and cup holders

 

Flash light



And a shovel



Thats all i got for now

 

On the holes? I thought I was **** ... you got me beat! But I might steal that mod yet ...

 

Pulled the bench and tossed in two front seats.

 

how much alteration for the seat mod?

 

I wielded tabs on the ends of the (slide rails) and bolted it down. Ill post some pix in the am.

 

Almost forgot I cut the the frame off just below the slide rail first, then the tabs went on.

 

Do it!! haha, i get a lot of compliments on it!! But yeah it takes forever hahaha

 

Did a speaker upgrade, but had to fab a pod and cut some metal in the door, but the results were worth it. Soundbar is in progress with the same speaker setup.

 

That looks sick! Way nicer than the stock ****...

 

Did the old LED swap in the gauges

 

Thanks. Also the Kenwood Bluetooth unit with mic and usb flushed into the dash to the left, and the Polk sub control next to the rear washer switch.

 

I started a Fitch box, but decided to put them in the shift panel. The leds work a little too well. I used a Sharpy to turn them black, but they are still pretty bright. It looks clean and that's what I wanted. There's not much space under the panel, but I got 'em in there.

The under side wiring in progress
Ran the wires to a Radio Shack project box under the hood that holds the relays and keeps them dry.

 

where can i get one of those nets for my cubby hole?

 

Car pc monitor and the interior shot with the cargo area stripped of carpet and diamond played sides and bottom...and bed lined.