Rear hatch inside release
08-31-2016, 02:09 PM
#1
Junior Member
Thread Starter
Rear hatch inside release
After searching for a write up on this to no avail I decided to forge ahead without instructions; risky but fun😮
Removed the inside panel:
Tools needed
The little red piece is where the strap attaches. Pulling up at that point releases the latch
Inside of the hatch cover
About 8 inches above the latch
Where the strap will exit
Sewing a loop in the end of the strap. I used nylon to assure no rattles
Finished
An easy project that cost $0 and took about an hour.
Jack
Removed the inside panel:
Tools needed
The little red piece is where the strap attaches. Pulling up at that point releases the latch
Inside of the hatch cover
About 8 inches above the latch
Where the strap will exit
Sewing a loop in the end of the strap. I used nylon to assure no rattles
Finished
An easy project that cost $0 and took about an hour.
Jack
08-31-2016, 11:27 PM
#3
Junior Member
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
Jeepman659
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
04-15-2016 09:20 PM
97XJ Jeeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
05-12-2008 12:02 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)