Rear axle and drive shafts
#1
Member
Thread Starter
Join Date: Dec 2011
Location: CT
Posts: 145
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0L I6 High-Output
Rear axle and drive shafts
I'm going to replace my rear axle and my question is
Does the rear drive shaft that fits into the Dana 35 fit into a Chrysler 8.25?
All input would help
Thank you
Does the rear drive shaft that fits into the Dana 35 fit into a Chrysler 8.25?
All input would help
Thank you
#3
CF Veteran
Join Date: Feb 2010
Location: Cove, OR
Posts: 2,095
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
They both have 1310 u joints so the joint would fit. As for the drive shaft length, you would have to measure depending on lift, SYE or not, transmission, and transfer case it may fit or not.
#6
Member
Thread Starter
Join Date: Dec 2011
Location: CT
Posts: 145
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0L I6 High-Output
I only have a 3" lift so I don't think I need a SYE right?
I have an automatic transmission with np231 I think it's called correct me if I'm wrong.
I just have to do the swap real soon and now all I'm really worried about is the length of the shafts.
Could I reuse my driveshaft or do I have to get the one from the c8.25?
I have an automatic transmission with np231 I think it's called correct me if I'm wrong.
I just have to do the swap real soon and now all I'm really worried about is the length of the shafts.
Could I reuse my driveshaft or do I have to get the one from the c8.25?
Thread
Thread Starter
Forum
Replies
Last Post
Wybuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
01-30-2024 08:59 AM
MACherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-20-2015 01:57 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)