Rear axle centering in wheel well. Help!
Thread Starter
Member
Joined: Jun 2010
Posts: 247
Likes: 0
From: Soddy Daisy, TN
Year: 1999
Model: Cherokee
Engine: 4.0L
I've got a 1999 on a 4.5 lift. Its actually a bastard pack put together by the PO. He claims it was from Rusty's. But the rear axle is a good 2 to 3 inches of center of the wheel well. I'm going 33s soon and I'm afraid it'll rub once I do. Its not too bad on 31s after I just cut my fenders but it is just enough to irritate me.
How can I fix this?
After my recent cut and fold fender day!
How can I fix this?
After my recent cut and fold fender day!
CF Veteran
Joined: Apr 2009
Posts: 1,601
Likes: 1
From: Kalamazoo, MI
Year: 2000
Model: Cherokee
Engine: 4.0L with throttle body spacer and cold air intake, bored throttle body, #784 injector upgrade
What happened to your centering pin? There is a pin that goes through the leaf pack and helps to center the axle... now if the hole for the pin is that far back then it won't help you with the issue.
Thread Starter
Member
Joined: Jun 2010
Posts: 247
Likes: 0
From: Soddy Daisy, TN
Year: 1999
Model: Cherokee
Engine: 4.0L
The PO was and idiot. I traded a grand cherokee for this one and continue to find myself redoing things the right way.
When I went looking for the centering pin about two weeks ago I realized it wasn't there. He did a bead of weld from under the perch that went through the base of the lift block then had the pin coming through the top of the block and halfway through the leafs.
That's my next step is to drop the rear axle and see if it can be fixed doing it the Right Way! And if not then its new leafs.
Here's pics I took today.
When I went looking for the centering pin about two weeks ago I realized it wasn't there. He did a bead of weld from under the perch that went through the base of the lift block then had the pin coming through the top of the block and halfway through the leafs.
That's my next step is to drop the rear axle and see if it can be fixed doing it the Right Way! And if not then its new leafs.
Here's pics I took today.
Trending Topics
CF Veteran
Joined: Apr 2009
Posts: 1,601
Likes: 1
From: Kalamazoo, MI
Year: 2000
Model: Cherokee
Engine: 4.0L with throttle body spacer and cold air intake, bored throttle body, #784 injector upgrade
WTH? Wow... I guess that he didn't think it was needed...
Thread Starter
Member
Joined: Jun 2010
Posts: 247
Likes: 0
From: Soddy Daisy, TN
Year: 1999
Model: Cherokee
Engine: 4.0L
So I'm pretty sure I figured out today what the cause of the problem is.
I measured from the center pin to the front mount of the leafs and it was 25 in from center to rear mount was 28.
Then I measured me Cherokee and it measured 23.5 from center to front and 28 to the back.
Being a bastard pack he used S-10 springs which could be different center holes. I think he used the S-10 main leaf instead of cutting the ends off and using the jeeps stock one.
Here's think link if your a visual person like me.
http://www.rocklizardfabrications.co...dget_boost.htm
I measured from the center pin to the front mount of the leafs and it was 25 in from center to rear mount was 28.
Then I measured me Cherokee and it measured 23.5 from center to front and 28 to the back.
Being a bastard pack he used S-10 springs which could be different center holes. I think he used the S-10 main leaf instead of cutting the ends off and using the jeeps stock one.
Here's think link if your a visual person like me.
http://www.rocklizardfabrications.co...dget_boost.htm
Last edited by Fugatt2DrXJ; Feb 23, 2012 at 09:11 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Wybuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
Jan 30, 2024 08:59 AM
MACherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Aug 20, 2015 01:57 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
