RCX rock sliders!
07-28-2009, 05:07 PM
#1
CF Veteran
Thread Starter
Join Date: Apr 2009
Posts: 1,696
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L I6
RCX rock sliders!
got my rough country rock sliders in today but will have to wait to install cause of the rain, they look sick!! i cant wait to put them on, pics will be posted after install
07-28-2009, 06:33 PM
#2
CF Veteran
Thread Starter
Join Date: Apr 2009
Posts: 1,696
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L I6
oh and also have nothing but good things to say about rough country, Jason at RC took care of everything very well, great customer service and it was shipped to me within 3 days, overall everything was great no hassle at all!
Trending Topics
07-29-2009, 07:55 PM
#10
CF Veteran
Thread Starter
Join Date: Apr 2009
Posts: 1,696
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L I6
well got most of it done, the drilling into the unibody is easy on the bottom but the top drilling is much harder cause i have to drill at an angle but im gettin there, will have pics tomorrow
07-31-2009, 07:40 PM
#14
CF Veteran
Thread Starter
Join Date: Apr 2009
Posts: 1,696
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L I6
started by getting 2 of my buddies to hold them up while i drilled the holes, i used a 1/4'' dril bit for a pilot hole them finished them off with an 11/32'' as stated in the "instructions"
the front most bracket was supposed to be 5 1/4'' away from the UCA bracket so thats where i measured it
one my friends left i nig rigged a little support while i drilled and bolted up
cool litttle rough country weld
what the whole beast looks like muddy, overall i like them very much, i will put up more pice of them tomorrow of them installed and everything, i just snapped a few as i was installing, i do plan on plating the unibody and welding them sometime soon for more durability, in all it took me about 4 hours cause the unibody is not that easy to drill through especially when drill bits are gettin dull, breaking and everythin else, but all in all a great product, any questions feel free to ask!
the front most bracket was supposed to be 5 1/4'' away from the UCA bracket so thats where i measured it
one my friends left i nig rigged a little support while i drilled and bolted up
cool litttle rough country weld
what the whole beast looks like muddy, overall i like them very much, i will put up more pice of them tomorrow of them installed and everything, i just snapped a few as i was installing, i do plan on plating the unibody and welding them sometime soon for more durability, in all it took me about 4 hours cause the unibody is not that easy to drill through especially when drill bits are gettin dull, breaking and everythin else, but all in all a great product, any questions feel free to ask!
Last edited by mobilecherokee4; 08-01-2009 at 11:54 AM.