Alright, I'm finally getting set up with my own tools. So far I have no 12 point sockets or torx drivers. My 6 point sockets go up to 15/16" or 19mm. Also I have no deep well sockets. So basically I want a complete set of tools to do pretty much any required work on the XJ

1. What size 12 point bolts are there on XJs?
2. What size torx bits?
3. Are there any bolts that require deep well sockets?
4. What socket sizes do i need larger than 15/16 or 19mm? (aside from the 36mm wheel bearing nut socket, got that.)

 

My lug nuts are bigger than 19mm

And yes, you'll need deep sockets.

And allen wrenches.

 

ball joint nuts are bigger than 1" as well as tcase drain and fill plugs.

13mm 12 point is needed to remove hub assemblies from the knuckle

 

DONT FORGET THE BREAKER BAR! Ive been using my 2ft breaker bar with an impact head and it gets bout everything off that isnt welded on

 

All the torxs on mine were T27 and T25 just buy the whole set though

 

Bolts for rear leafs, and gas tank mounting are 21 mm I belive, would get a complete set up to at least 21 in sockets and deep well. Also torx up to t60 for ofa. 16 and 18 seem pretty commonly used on my xj and freq lost in my garage.