power windows :(
Thread Starter
Newbie
Joined: Mar 2013
Posts: 12
Likes: 0
From: Butte County
Year: 99
Model: Cherokee
Engine: 4.0 cherokee Sport
im having the infamous power window problem where only the captains chair operates the windows ???? there is 1 video on youtube fixing this problem , is it as easy as he makes it look ?????
my 99 cherokee sport is not lifted but restored
my 99 cherokee sport is not lifted but restored
Senior Member
Joined: May 2013
Posts: 541
Likes: 1
From: Vancouver
Year: 1998 and 1988
Model: Cherokee
Engine: 4.7
I just shorted the in and out power wire behind the kick panel at the driver's feet.
This video pretty much says it all except I didn't solder them. I used one of the trailer harness wire clips to attach 2 wires together. Just make sure you get one for 12 gauge wire and you are done.
Last edited by karl4x4; Aug 19, 2013 at 09:22 PM.
Member
Joined: Aug 2013
Posts: 174
Likes: 0
From: The Colony, TX
Year: 2001
Model: Cherokee
Engine: 4.0
I used that same blue connector to fix mine. No wire splicing or soldering. Took 10 minutes start to finish and all was working again (minus the lock button). Very easy fix.
Senior Member
Joined: May 2013
Posts: 541
Likes: 1
From: Vancouver
Year: 1998 and 1988
Model: Cherokee
Engine: 4.7
rule of thumb. If the switch LED is lit up, it has power. If not green LED, not power going to it..
Im guessing if it dims, there is a big current draw somewhere.
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,577
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
I just bypassed the child safety switch. Dont even have to go into the door.
I just shorted the in and out power wire behind the kick panel at the driver's feet.
http://www.youtube.com/watch?v=KeNBpzFnltk
This video pretty much says it all except I didn't solder them. I used one of the trailer harness wire clips to attach 2 wires together. Just make sure you get one for 12 gauge wire and you are done.

I just shorted the in and out power wire behind the kick panel at the driver's feet.
http://www.youtube.com/watch?v=KeNBpzFnltk
This video pretty much says it all except I didn't solder them. I used one of the trailer harness wire clips to attach 2 wires together. Just make sure you get one for 12 gauge wire and you are done.

Super easy. Just did it today on my buddy's 99.
Trending Topics
Member
Joined: Oct 2012
Posts: 165
Likes: 0
From: SE Michigan
Year: 2000
Model: Cherokee
Engine: 4.6L Stroker
Such a hack fix for a fairly easy solution. The problem seems to lie the the child safety button. Pop the door panel off, remove the switch panel, pop all the window buttons (all six of them), unscrew the switch body front and back halves and remove the circuit board. Resolder the joints and check continuity on the wires to make sure nothing is broken in the door boot. While you are in there, check the detent spring and make sure the child safety switch stays in the down position when cycled. Mine was bent, so even after I repaired the solder the spring wasn't catching so it was always releasing back to a shorted state rendering the switch useless.
Thread
Thread Starter
Forum
Replies
Last Post
Bookspans
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Mar 17, 2021 07:41 PM
vegasXJ-Davey
Modified XJ Cherokee Tech
0
Sep 7, 2015 09:30 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



