Online store recommendation
I need some OEM stock engine mounts for my '99, anyone have a suggestion on where to find them online at a good price? I have brown dogs currently but the vibrations are a bit much for me with the truck being a DD.
Thanks for any suggestions. :cheers: |
Advance Auto
|
I thought they were only Duralast?
|
Duralast is good stuff
|
I read a few times that OEM from Mopar/Chrysler was the only way to go..?
|
Ummm no.
|
Give ya $10 bucks shipped for the brown dog mounts.
|
I'll give you $20
|
$55 kthxbye
Might give Duralast a shot. |
The duralast will work fine. I recommend if you havent look already to check your tranny mount as well. If your engine mounts are wore out, your tranny mount is usually wore out as well.
|
^ this....major difference with all new mounts....i was chasin vibes for a while IE tcase drop rear shims new joints etc..replaced all the mounts vibes got a little better...pulled out t case drop and shims and viola no vibes...nice and SMOOTH.. New mounts are well worth the time and $$ even if you dont have vibes...just smooths everything out :) then again I am old and cant stand even the slightest vibe or rattle
my two cents Cameron |
If you haven't ordered them try like rockauto.com or some of our vendors on here.
|
Originally Posted by ck1
(Post 2210006)
^ this....major difference with all new mounts....i was chasin vibes for a while IE tcase drop rear shims new joints etc..replaced all the mounts vibes got a little better...pulled out t case drop and shims and viola no vibes...nice and SMOOTH.. New mounts are well worth the time and $$ even if you dont have vibes...just smooths everything out :) then again I am old and cant stand even the slightest vibe or rattle
my two cents Cameron |
No pics but the best way to make sure just drop your skid plate/x member and look at your mount. You should have a good 2+ inches of rubber between the mount. Get a good pry bar up there and see if you can move the trans a lot. Anything cracked,squished,sagged or broken in half replace it. The 4.0 is a very torquey motor thus hard on all mounts. This is compounded if you are in low range a lot.
Cameron |
Advance Auto has Anchor motor mounts never had a problem with them, plus they price match if you find it cheaper anywhere.... btw Autozone=Duralast parts
|
All times are GMT -5. The time now is 10:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands