Offset to backspacing
#1
CF Veteran
Thread Starter
Join Date: Feb 2016
Location: Northern New Mexico
Posts: 3,683
Likes: 0
Received 7 Likes
on
6 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Offset to backspacing
I need some help. I'm looking at some rims on craigslist. The guy says they are -12 offset. What would the backspace be? I know the differences but not how to convert haha
#2
CF Veteran
gotta know how wide the rims are.
-12 is how many millimeters the mounting surface is off center. a minus offset will make the tire stick out further than a positive offset.
so if it's an 8 inch wide rim, 4 would be center. then 12mm is about half an inch, so you would be in between 3.5 and 3.75 backspacing.
if it's a 10 inch rim, 5 is center, so it would be like 4.5 backspacing...
there is 25.4mm to an inch
-12 is how many millimeters the mounting surface is off center. a minus offset will make the tire stick out further than a positive offset.
so if it's an 8 inch wide rim, 4 would be center. then 12mm is about half an inch, so you would be in between 3.5 and 3.75 backspacing.
if it's a 10 inch rim, 5 is center, so it would be like 4.5 backspacing...
there is 25.4mm to an inch
#5
CF Veteran
Join Date: Nov 2011
Location: City of Trees, CA
Posts: 7,387
Likes: 0
Received 10 Likes
on
9 Posts
Year: 93 2 door
Model: Cherokee
Engine: 4.0
cut a piece of wood to match the diameter of the wheel. Bring a measuring tape and measure from the wheel mounting surface to the piece of wood
Backspace
Backspace
#6
You probably know most of those things. Hopefully that will help the next guy searching for backspacing.