Well my rockers are starting to develop holes and i want to fix them really quickly. i dont have welder or any experience i have buddy that can do them but i have no idea how much is it gonna cost. has anyone here gotten them replaced by a garage and how much was the total bill

 

i had mine done and the total cost was about 650 after parts and labor

 

where is good place to buy rockers he said he can do it cheaper if i buy the rockers

 

If you wheel your Jeep I wouldnt waste that much money on rockers. Cut out your rockers and have your buddy weld in some channels in there instead of the rockers. It will come out cheaper and serve a purpose as sliders. There are threads on this. Look it up , it might be something you would be interested in.

 

This



Really looks like this



So you get some 2x tube, x4 for a stock look or x6 for more of a rocker look. Plug weld some angle to the unibody channel, to carry the back side of the tube.



Then plu weld some 1x1/8" strap through the sill to the tube. That does two things, it sandwiches the sheetmetal sill to the tube and it provides a nice surface to weld to