Help keep blowing fuse for brake taillights.

Subscribe
Oct 27, 2015 | 03:07 PM
  #1  
Keep blowing brake light fuse.disconnected both taillights and brake switch still blowing fuse.any suggestions.thanks
Reply 0
Oct 27, 2015 | 03:08 PM
  #2  
Got some cobbled up trailer wiring?
Reply 0
Oct 27, 2015 | 03:44 PM
  #3  
Quote: Got some cobbled up trailer wiring?
Don't have any trailer harness. It started left rear brake light socket melted.went to replace fuse keeps blowing.disconnected both tailligjts plus brake switch.still blows fuse.any help would be greatly appreciated.
Reply 0
Oct 27, 2015 | 03:48 PM
  #4  
The problem is near the melted part......
Reply 0
Oct 27, 2015 | 03:50 PM
  #5  
Quote: The problem is near the melted part......
Disconnected the melted light socket at the connector still blows fuse
Reply 0
Oct 27, 2015 | 03:54 PM
  #6  
Then it's melted somewhere else also.

Unplug the turn signal harness under the column. Long flat connector.
Reply 0
Oct 27, 2015 | 03:58 PM
  #7  
Quote: Then it's melted somewhere else also.

Unplug the turn signal harness under the column. Long flat connector.
All the lights directionals blinkers hazard work fine everything but brake lights.
Reply 0
Oct 27, 2015 | 04:02 PM
  #8  
but brake lights run through the turn signal switch also.
Reply 0
Oct 27, 2015 | 04:06 PM
  #9  
Quote: but brake lights run through the turn signal switch also.
OK your saying check turn signal for short ok will look at it.I'm at work rite now.will let you know.thanks for your help
Reply 0
Subscribe
Currently Active Users (1)