usmc cloves would like this

 

Mine was such a pain. But I got it done

And I'll throw up a tutorial for The guy asking about visors. Give me a sec

 

yessssss.... How did you do your visors?

 

step 1: remove oem visor material, be sure you dont mess it up because you will need to use it for a pattern.

step 2: cut out your fabric using the material you just cut off. be sure you match up every hole.

step 3: hardest part, just wrap the material around the visor and pop the mirror back in and use that to hold the material up while you press it in. and then slowly use a knife to press it down in the cracks.

step4: your done! i suggest using spray glue on the visor before pressing the fabric in.( i didnt, its fine witout it but would prob look better) and also if you having a problem with the fabric popping out, just fabric glue the cracks and you will be good to go!

 

I got it easy no mirror

 

well it should be super easy then.

i do suggest sprayying them down with 3m until its tacky and thicker material will be better to use on them, mine come loose from the cracks 1 out of 5 times when i pull the visors down or drive on the interstate with the windows down

 

So it just pushes into the crack huh?...easy

 

yep real simple just time consuming