stangcrazy85

my 2000 sport has covers where it should have come with factory fog's
so im not shure if the wiring is even there or there is no apparent switch in cab so im just slightly confused on my options i do not want a secret toggle switch or anything that cool so any help would be great thanks

askingxforxit

The wiring harness is probably there with wiring in the cab behind the dash for fog lights. Your particular cherokee want ordered from the factory with fog lights but they are all made with wiring and harnesses.

Someone correct me if I'm wrong please.

cf1k1

I've looked down there an haven't seen any harness. But, I also may be wrong...

JCKustoms

My 2000 was the same way...I had no harness in or outside the cab. So I just ordered a factory switch and the factory fog lights and wired them up! also had to cut out the bumper where the lights go...there are mounting holes already there for you to mount the factory light!

askingxforxit

Mounting holes but no wiring?!?! Howe thoughtful of jeep lol

Dre

It was optional. Depending on the bumper they had, they mounted something. I know the 01 jeeps have them under the bumper by those cut outs in the plastic. Go for LED's. You can put a relay in to have them as power on with something else or just wire them to a switch. Either way, it's easy to do.

askingxforxit

Yup I've done lights before. I like to have mine on an axillary switch.

stangcrazy85

so is there a led that fits the hole correctly or are they gonna look stupid ??

askingxforxit

Unless you have HID headlights they still look stupid IMHO

Dre

Is right. They will look stupid. Go on EBay and buy the 6054 beams. They have clear and smoked sets with HID of Halogen. just make sure you have them aimed. They are extremely bright when u have the projection lens in. The ones without aren't DOT rated, but give you a better spray on the ground with full lighting. The projection just looks new.

You can prob the fuse panel in the engine compartment and use a relay. But if u like a switch go for it. I like relays because when the connected device goes off, it disconnects the relay. Ie, shut the car off and it goes out with an acc connected power source.

stangcrazy85

right i dont want that awesome dumb look lol i have hid on the list as we speak but i do thank u guys have any of u tried the led turn signal bulbs or any interior led bulbs ?? just curious what that will look like

Dre

I changed ever bulb I can to LED. You have to go to Autozone for the LED flasher. I have to find out why I need to turn my park lights or take my foot off for the four way flashers to work. I have pics on here. Look for HID fog/drive lights. They look better but are blinding when behind you up close. Everything on EBay!

Dre

Oh, use relays on the HID's. They flicker like strobes. I'm an installer. It's not that hard to wire!

ptonjeep

just wire it straight to the battery its not hard to do. the cut a hole for a switch next to the wiper switch there is plenty of room

Dre

For fog lights yes. Headlights, use the stock connector but a separate power source. That way when you use the high beams, the low beams operate like factory. You just need a relay, fuse and wiring diagram. Search for HID wiring diagram.

Fogs just need a separate power source, fuse and switch. In that order!